6 Instruction book Lily 555/545
1. Place the machine on the table
or cabinet, remove the packaging
and lift off the cover.
2. Remove the side parts of the
packing material, the extension
table, the foot control and fi nally
the protection cover.
3. The machine is delivered with an
accessory bag, a main cord and a
foot control cord.
4. Wipe the machine, particularly
around the needle and needle
plate to remove any soil before
sewing.
Unpacking
Make sure the extension table is fi t-
ted into the right part of the acces-
sory tray and fold the table toward
the machine. Fold down the handle
and replace the cover.
Procedures
1. Unplug the cords from the wall
socket and the machine.
2. Wind the cords around your hand
and place the foot control cord
in the foot control storage space
and the main cord in the pocket
of the cover. There is also space
provided for the instruction book.
3. Check to ensure that all acces-
sories are in the accessory tray.
Slide it onto the machine behind
the free arm.
4. Lower the presser foot.
5. Place the foot control, underside
toward you, on the accessory
tray at the back of the machine,
where also the extension table is
placed.
Packing away after sewing
To Next Page
Loading...
