Need help?Do you have a question about the Husqvarna 5530 and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | 5530 |
| Category | Sewing Machine |
| Language | English |
Focuses on electrical system checks and necessary adjustments specific to model 6570.
Covers routine service procedures and adjustments for maintaining machine performance.
Details the electrical connections for terminal blocks and foot pedal controls.
Explains how to adjust the thread tension of the lower thread using the bobbin case spring.
Details the adjustment of the upper thread tension using calibrated discs and a knob.
Describes the electric motor and its connection to the machine base for sound isolation.
Explains how power is transmitted from the motor to the machine via belts and gears.
Outlines the steps for disassembling the pattern selector mechanism.
Continues the detailed steps for disassembling the pattern selector mechanism.
Provides the remaining steps for disassembling the pattern selector, including gear and clip removal.
Discusses gear replacement for pattern selectors and lists orderable spare parts.
Explains wiring for interference suppressors.
Details wiring for the discharge resistor on grounded machines.
Explains lamp wiring connections on grounded machines.
Provides specific instructions for wiring ground connections on grounded machines.
Details wiring for the condenser in the foot control.
To Next Page