EasyManua.ls Logo

Husqvarna 5010 User Manual

Husqvarna 5010
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Husqvarna 5010 and is the answer not in the manual?

Husqvarna 5010 Specifications

General IconGeneral
BrandHusqvarna
Model5010
CategorySewing Machine
LanguageEnglish

Summary

STITCH FORMATION

SHUTTLE SYSTEM

THREAD TENSION

UPPER THREAD TENSION

Details on adjusting upper thread tension for optimal stitch quality.

THE DRIVING OF THE MACHINE AND ELECTRIC SPEED REGULATION

ELECTRIC DRIVE

Explanation of the motor's role in driving the sewing machine.

POWER TRANSMISSION

How power is transferred from the motor to the machine's mechanisms.

SPEED CONTROL

PATTERN MECHANISM

NEEDLE BAR MOVEMENT IN PATTERN MECHANISM

Describes the needle bar's movement and its relation to the pattern.

MOVEMENT OF THE FEED DOG

STITCH LENGTH MECHANISM

BUTTONHOLE MECHANISM

UPPER MAIN SHAFT

LOWER MAIN SHAFT

THE V-BELT

V-BELT AND LOW GEAR ADJUSTMENT

Procedure for adjusting V-belt tension and low gear.

BELT TENSION ADJUSTMENT

How to set the correct belt tension.

FOOT CONTROL

FOOT CONTROL FUNCTIONALITY CHECK

Procedure to verify the functionality of the foot control.

PRINTED CIRCUIT BOARD

PRINTED CIRCUIT BOARD REMOVAL

Steps for safely removing the printed circuit board.

THE LOWEST SPEED OF THE MOTOR

TAKE HOME TURNING SPEED

SETTING THE UPPER STOP-RIGHT POSITION OF THE NEEDLE

TIMING THE ZIGZAG MOVEMENT

NEEDLE TO HOOK CLEARANCE

FEED TEETH ALIGNMENT

FEED DOG HEIGHT

FEED TIMING

HEIGHT AND ALIGNMENT OF THE PRESSER BAR

SETTING THE UPPER THREAD TENSION

SETTING THE THREAD TENSION OF THE BOBBIN CASE

WIRING DIAGRAM FLATBEDS CLASSES 49, 51, 51A, 71, 71E MODELS 1310, 3310, 4310, 6310, 6320

FOOT CONTROL WIRING DIAGRAM CLASSES 8, 19S, 19A, 21, 21A, 2000 MODELS 0210, 1010, 3010, 4010, 5010, 5210, 6010

Related product manuals