Need help?Do you have a question about the Husqvarna 575 X-Torq and is the answer not in the manual?
General| Engine Displacement | 73.5 cm³ |
|---|---|
| Chain Pitch | 3/8" |
| Sound Pressure Level | 103 dB(A) |
| Engine Type | X-Torq |
| Bar Length (recommended) | 15-28 in |
| Chain Gauge | 0.058 in |
| Fuel Tank Volume | 0.77 L |
Explains symbols shown on the chainsaw for safety and operation.
Explains symbols used within the manual for instructions and warnings.
Information about the manufacturer and its history.
Details engine compliance with emission standards.
A welcoming message from the manufacturer to the user.
Identifies and labels all parts of the chainsaw.
Essential checks and preparations before the first use.
Key considerations and advice for safe operation.
Emphasizes the need for caution and good judgment during operation.
Guidance on required safety gear for chainsaw operation.
Overview and importance of the chainsaw's built-in safety features.
Information on the function and checks for the chain brake and front guard.
Explains the function and importance of the throttle locking mechanism.
Describes the purpose and function of the chain catching device.
Details the protective function of the right hand guard.
Information on how the vibration damping system reduces user fatigue.
Ensuring the engine stop switch functions correctly.
Information on the muffler's role in noise reduction and exhaust management.
Advice on selecting and maintaining cutting components.
Details on selecting components to minimize kickback risk.
Information on the chainsaw bar, its specifications, and maintenance.
Details on the chainsaw chain, types, and specifications.
Definitions of key terms used to describe chainsaw bar and chain components.
Instructions for maintaining cutting teeth for optimal performance.
Tips for correctly adjusting the depth gauge for efficient cutting.
Step-by-step guide for setting the depth gauge on the chain.
Step-by-step guide on how to properly tension the saw chain.
Procedures for ensuring adequate lubrication of the bar and chain.
Information on the chain drive sprocket and its maintenance.
Instructions for lubricating the needle bearing on the output shaft.
Guidelines for inspecting the chain and bar for wear and damage.
Instructions for correctly installing the guide bar and saw chain.
Information on recommended gasoline types and octane ratings.
Specifies the correct gasoline to oil ratio for the engine.
Safety precautions and steps for refueling the chainsaw.
General safety rules to follow when handling fuel.
Procedure for starting the chainsaw engine when cold.
Step-by-step instructions for starting the chainsaw.
Instructions on how to safely stop the chainsaw engine.
Checklist of pre-operation checks for safe use.
Fundamental safety rules and operational guidance.
Essential safety guidelines to follow while operating the saw.
Broader guidelines for safe and effective chainsaw operation.
Fundamental methods for cutting wood with the chainsaw.
Techniques for cutting branches from a felled tree.
General procedures for cutting logs and wood.
Detailed methods for safely felling trees.
Establishing a secure perimeter during tree felling operations.
The process and principles of felling a tree.
Specifics on making the final cut for controlled tree felling.
Procedures for safely dealing with trapped or improperly fallen trees.
Essential safety information on preventing dangerous kickback.
Understanding the phenomenon of chainsaw kickback.
Overview of user-accessible maintenance tasks.
Instructions for tuning the engine's fuel-air mixture.
Specific steps for fine-tuning the carburetor after initial break-in.
Indicators of a properly tuned carburetor for optimal performance.
Checks and maintenance for critical safety features.
Maintenance and checks for the throttle lock mechanism.
Ensuring the engine stop switch functions correctly.
Information on muffler maintenance and spark arrestor screen cleaning.
Maintenance and repair procedures for the starter mechanism.
Procedures for cleaning and replacing the air filter.
Maintenance and replacement of the spark plug for engine performance.
Instructions for greasing the bar tip for longevity.
Guidance on cleaning and maintaining the engine's cooling system.
Maintenance for models equipped with heated handles.
Maintenance for models with electric carburetor heating.
A summary of recommended maintenance tasks by frequency.
Specifications related to the engine's performance and dimensions.
Details on the carburetor, fuel, and oil systems.
Specifications for the chainsaw's cutting bar and chain.
Lists compatible bar and chain models for safety and performance.
Information on proper chain sharpening techniques and tools.
Outlines owner duties, claim procedures, and warranty service.
Details what parts are covered and conditions that void the warranty.
General safety guidelines for operating chainsaws.
Specific safety advice to prevent and manage kickback incidents.
To Next Page