Husqvarna 372 XPG X-TORQ User Manual

365 X-TORQ, 372 XP X-TORQ, 372 XPG X-
TORQ
EN Operator's manual 2-39
ES-MX Manual del usuario 40-82
FR-CA Manuel d’utilisation 83-124

Husqvarna 372 XPG X-TORQ Specifications

General

Fuel tank volume	0.77 l
Chain pitch	3/8"
Engine displacement	70.7 cm³
Oil tank volume	0.42 L
Chain gauge	0.058 "

Summary

Introduction

Intended Use

Purpose of the product for sawing wood.

Product Description

Overview of the chainsaw models and their engine.

Product Overview

Symbols on the Product

Safety Guidelines

Safety Definitions

Explains the usage of warnings, cautions, and notes in the manual.

General Safety Instructions

Provides essential safety guidelines for operating the chainsaw.

Safety Devices

Chain Brake and Front Hand Guard

Details the chain brake mechanism and its interaction with the front hand guard.

Throttle Trigger Lockout

Explains the function of the throttle trigger lockout for preventing accidental operation.

Fuel and Maintenance Safety

Fuel Safety

Critical safety information related to handling and using fuel.

Safety Instructions for Maintenance

Guidelines for performing maintenance safely and correctly.

Assembly Instructions

Assemble Guide Bar and Saw Chain

Step-by-step instructions for attaching the guide bar and saw chain.

Operation Procedures

Function Check Before Use

Procedures to verify the correct operation and condition of safety features before use.

Fueling the Chainsaw

Mix Gasoline and Two-Stroke Oil

Instructions on how to correctly mix fuel and two-stroke oil for the engine.

Kickback Prevention

Fill the Fuel Tank

Procedure for safely refilling the fuel tank.

Use Correct Chain Oil

Guidance on selecting and using the appropriate chain oil.

Starting the Chainsaw

Kickback FAQs

Addresses frequently asked questions regarding kickback phenomena.

Stopping and Cutting Techniques

To Use Cutting Technique

Explains the proper methods for cutting wood with the chainsaw.

To Use the Spiked Bumper

Instructions on utilizing the spiked bumper for stable cutting.

Cutting Operations

Cut Trunk on Ground

Step-by-step guide for cutting trunks resting on the ground.

Limbing Technique

Method for removing branches from a trunk.

Tree Felling

Tree Felling Technique

Guidance on the process of felling a tree safely.

Safe Distance

Importance of maintaining a safe distance during tree felling operations.

Felling Preparations

Calculate Felling Direction

How to determine the safest direction for felling a tree.

Clear Retreat Path

Steps to clear the area and ensure a safe escape route.

Felling Cuts

Felling Hinge

Explanation of the critical felling hinge and its importance for directional control.

Directional Cuts

Instructions for making the initial cuts to guide the tree's fall.

Advanced Felling

Free Trapped Tree

Safety procedures for releasing a tree caught during felling.

Cut Tensioned Branches

Techniques for cutting branches or trees under tension safely.

Cold Weather Operation

Use in Cold Weather

Tips and precautions for operating the chainsaw in cold conditions.

Product Features

Heated Handles

Information about the heated handle feature.

Electrical Carburetor Heating

Details on the electrical heating system for the carburetor.

Maintenance Schedule

Safety Device Checks

Check Brake Band

Procedure to inspect the brake band's condition and thickness.

Check Chain Brake

Steps to test the proper function of the chain brake.

Component Checks

Check Throttle Trigger & Lockout

Verifying the correct operation of the throttle controls.

Check Start/Stop Switch

Procedure to ensure the start/stop switch functions correctly.

Carburetor Adjustments

Adjust Low Speed Needle (L)

Instructions for adjusting the low speed needle for optimal performance.

Adjust Idle Speed Screw (T)

Guide on setting the correct idle speed for the engine.

Starter Rope Replacement

Replace Starter Rope

Steps for replacing a damaged or worn starter rope.

Air Filter and Spark Plug

Clean Air Filter

Method for cleaning the air filter to prevent engine issues.

Check Spark Plug

Procedure for inspecting and maintaining the spark plug.

Saw Chain & Guide Bar

Sharpening Cutters Overview

Overview of principles for sharpening saw chain cutters effectively.

Cutter Sharpening

Sharpen Cutters

Detailed instructions on how to sharpen the cutting teeth of the saw chain.

Adjust Depth Gauge Setting

Guide on setting the depth gauge for optimal cutting performance.

Saw Chain Tensioning

Adjust Saw Chain Tension

Steps to ensure the saw chain has the correct tension.

Equipment Checks

Examine Cutting Equipment

Procedure to inspect the saw chain, rivets, links, and cutters for wear.

Check Guide Bar

Steps for inspecting the guide bar for wear, blockages, and damage.

Oil Flow and Cooling

Adjust Chain Oil Flow

How to adjust the amount of oil delivered to the saw chain.

Clean Cooling System

Instructions for cleaning the engine's cooling system components.

Troubleshooting

Engine Does Not Start

Identifies common causes and solutions when the engine fails to start.

Transportation and Storage

Prepare for Long-Term Storage

Guidance on preparing the chainsaw for extended periods without use.

Technical Data

Recommended Cutting Equipment

Lists recommended guide bars and saw chains for the product.

Kickback and Bar Radius

Filing Equipment and Angles

Warranty Information

Manufacturer's Warranty Coverage

Details the warranty provided by the manufacturer for emissions control systems.

Owner's Warranty Responsibilities

Outlines the owner's duties for maintaining warranty validity.

Safety Precautions

Chain Saw User Safety

General safety advice for operating a chainsaw, including kickback prevention.

Additional Safety Precautions

Other Safety Precautions

Further safety warnings and guidelines for chainsaw operation.