Need help?Do you have a question about the Husqvarna 371XP and is the answer not in the manual?
Emphasizes reading and understanding safety precautions before repair work.
Requires workshops to have safety equipment and personnel to read the manual.
Covers fuel hazards, assembly before starting, and specific safety warnings.
Explains the warning symbol indicating risk of personal injury.
States idling, engagement, and maximum overspeed in RPM.
Divides faults into categories like Starting and Idling.
Lists common starting problems and their causes/solutions.
Covers issues related to low engine idling speed and uneven idling.
Addresses problems with high engine RPM, acceleration, and retardation.
Procedures for testing the chain brake's functionality.
Describes carburettor operation in cold start, idling, part, and full throttle modes.
Step-by-step guide to dismantle the carburettor.
Details how to perform pressure testing on the carburettor.
Step-by-step guide to reassemble the carburettor.
Explains pressure testing procedures and leakage checks.
Covers adjusting the carburettor for local conditions and engine performance.
How to adjust the low speed jet for optimal idling.
Procedure for setting the idling speed using the T-screw.
How to adjust the high speed jet for power and engine speed.
Step-by-step guide to dismantle the piston and cylinder.
Lists common faults related to piston and cylinder issues.
Step-by-step guide to reassemble the piston and cylinder.
Details how to pressure test the crankcase and cylinder.
Explains the dismantling and reassembly of the crankcase and crankshaft.
Step-by-step guide to dismantling the crankcase and crankshaft.
To Next Page
General