To Next Page
M
Mr. Brandon Smith MDJul 26, 2025
Why my Husqvarna Chainsaw engine does not start?
- MmarkmeyerJul 26, 2025
Several issues can prevent your Husqvarna Chainsaw engine from starting. It could be due to blocked starter pawls (adjust or replace them), incorrect fuel type (drain the tank and refill with the correct fuel), chain oil in the fuel tank (contact your dealer if you've tried starting it; otherwise, drain the tank), a dirty or wet spark plug (ensure it's dry and clean), an incorrect electrode gap (clean the spark plug and ensure the gap and plug type are correct), a loose spark plug (tighten it), or a flooded engine from repeated starts with full choke (remove and clean the spark plug, lay the chainsaw on its side with the spark plug hole facing away, pull the starter rope 6-8 times, then reassemble the spark plug and try starting).
General
