EasyManua.ls Logo

Husqvarna 582559701 User Manual

Husqvarna 582559701
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
114 09 59-20 Rev. 1
Operator / Parts Manual
582559701
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
Lisez très attentivement et soyez certain de comprende
ces instructions avant d’utiliser cette machine.
Por favor lea cuidadosamente y comprenda
estas intrucciones antes de usar esta maquina.
Grass Catcher
48 Inch Mower
Collecteur D'herbe
Tondeuse de 48 po.
Recogedor De Césped
Segadora de 48 Pulgada
Question and Answer IconNeed help?

Do you have a question about the Husqvarna 582559701 and is the answer not in the manual?

Husqvarna 582559701 Specifications

General IconGeneral
Model582559701
Power SourceGasoline
Deck MaterialSteel
Wheel Size (Front)8 inches
Weight75 lbs
Oil Capacity20 oz
Starter TypeRecoil
Mulching CapabilityYes
Bagging CapabilityYes
Side Discharge CapabilityYes
TypeWalk-Behind Lawn Mower
Fuel Tank Capacity0.5 gallons

Summary

Know Your Grass Catcher

Tips For Improved Bagging

General Operation

General Recommendations and Tools

General Recommendations

Observe safety rules and check fasteners before use. Clean unit thoroughly after each use.

Blade Care

Keep mower blades sharp. Replace bent or damaged blades as per operator manual.

Storage

Clean catcher thoroughly and store in a clean, dry place.

Tools Required

Lists necessary tools including wrenches and socket wrench for assembly.

Parts Identification

Diagram and list identifying all components of the grass catcher system.

Assembly

Bagger Mount

Step-by-step instructions for mounting the bagger tube and support straps to the mower.

Mounting Cover Assembly

Guidance on lifting and rotating the cover to align brackets with support tubes.

Container Assembly

Instructions for inserting spacer plugs and replacing end caps on bag support arms.

Upper Chute Installation

Steps to install the upper chute through the cover assembly and onto the lower chute.

Lower Chute Installation

Procedure for attaching the lower chute to the mower deck using bolts and knobs.

Weight Kit Installation

Instructions for bolting weight plates to brackets and attaching to the mower frame.

Leveling Mower Deck

Guidance on ensuring the mower deck is properly leveled for optimal performance.

Repair Parts

Related product manuals