TO CONVERT MOWER
Your lawn mower was shipped ready to be
used as a mulcher,, To convert to bagging
or discharging:
REAR BAGGING
° Open rear door, remove mulcher plug_
Store mulcher plug in a safe place..
° You can now install the grass catcher or
optional clipping deflector.
° To convert to mulching or discharging
operation, install mulcher plug into rear
discharge opening of mower.
MOWER IS
NOW READY FOR
DISCHARGING OPERATION
I
I
Mutcher plug
SIDE DISCHARGING
, Mulcher plug must be installed into rear
discharge opening of mower_
- Open mulcher door and install dis-
charge deflector under door as shown..
o Mower is now ready for discharging
operation.
, To convert to mulching or bagging
operation, discharge deflector must be
removed and mulcher door closed.
Open mulcher door
I
I
Discharge deflector
SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR LAWN MOWER
FOR MULCHING -
I. Rear mutcher plug installed.
2. Mulcher door closed.
FOR REAR BAGGtNG -
1. Rear mutcher plug removed
2, Grass catcher instafled.
3, Mulcher door closed.
FOR SIDE DISCHARGING -
1,, Rear mulcher plug installed.
_ Discharge deflector installed,
CAUTION: Do not run your lawn
mower without mulcher plug or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear door
removed or propped open,
TO EMPTY GRASS CATCHER
1 Lift up on grass catcher using the
frame handle,,
2, Remove grass catcher with clippings
from under lawn mower' handler
3. Empty clippings from bag.,
NOTE: Do not drag the bag when empty-
ing; it will cause unnecessary wear,
Grass
catcher
t_l frame
/ ""_ handle
To Next Page
Loading...
