Need help?Do you have a question about the Husqvarna 966061101 and is the answer not in the manual?
General| Model | 966061101 |
|---|---|
| Brand | Husqvarna |
| Deck Material | Steel |
| Side Discharge | Yes |
| Engine | Briggs & Stratton |
| Mulching Capability | Yes |
| Cutting Width | 46 cm (18 inches) |
| Cutting Height Range | 25-75 mm (1-3 inches) |
| Weight | 30 kg (66 lbs) |
| Fuel Tank Capacity | 1.1 L (0.29 gallons) |
Overview of the manual, machine's purpose, and general usage guidelines.
Covers safe driving, transport, towing, and operational precautions.
Explains how to identify the machine and the importance of dealer service.
Explains the meaning of all warning, safety, and operational symbols on the machine.
Key safety instructions for operating the machine and protecting oneself.
Guidelines for safe handling of gasoline, propane, and environmental considerations.
Safety measures for transport, slopes, and Rollover Protection System (ROPS).
Identifies and describes the function of all controls on the operator panel.
Explains how to operate the motion control levers for movement and steering.
Details ignition switch, blade switch, fuel shut-off, and deck engagement controls.
Guidance for new operators on steering, zero turns, and initial operation.
Step-by-step instructions for starting, operating, and safely stopping the machine.
Tips for effective mowing, safe operation on slopes, and transport.
Covers daily checks, cleaning of the machine, deck, and components.
Instructions for servicing engine oil, filters, fuel system, and air cleaner.
Maintenance for the battery, brake system adjustments, and drive belts.
Outlines the lubrication schedule and points for lubricating wheels, spindles, and cables.
Procedures for changing hydraulic fluid and oil filter.
Steps to remove air from the hydraulic system after maintenance.
Solves common problems with engine starting, running rough, or lacking power.
Troubleshoots issues like vibrations, overheating, battery charging, and deck engagement.
Guidelines for preparing and storing the machine for extended periods.
Visual representation of the machine's electrical system and component connections.
Technical details about the engine, transmission, and related components.
Physical dimensions, cutting width, and frame data for different models.
Recommended torque values for various hex head cap screws.
Details conformity requirements and label information for USA and CE markets.
Sections for recording delivery, daily, and interval-based maintenance performed.
To Next Page