Contents
Introduction..................................................................... 2
Safety..............................................................................
3
Assembly........................................................................ 7
Operation........................................................................ 9
Maintenance................................................................. 11
Technical data.............................................................. 12
Accessories.................................................................. 13
EC Declaration of Conformity....................................... 14
Introduction
Product description
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of the products without prior notice.
Note: This manual cover battery operated power units.
Intended use
WARNING: This attachment may only be
used together with the intended product, see
the accessory chapter in the Operator’s
Manual of the product.
This is a brushcutter to cut different types of vegetation.
Do not use the product for other tasks than grass
trimming and grass clearing. Use a grass blade to cut
grass.
Note: National or local regulations may regulate the use.
Comply to given regulations.
Product overview
1. Operator's manual
2. Bevel gear
3. Hole for locking pin
4. Grass blade
5. Cutting attachment guard
6. 4 mm hex
7. Shaft
8. Locking pin
9. Harness support hook
10. Harness
11. Locknut
12. Support flange
13. Support cup
14. Drive disc
15. J-handle
16. Transport guard
2 1340 - 001 - 20.12.2019