EasyManua.ls Logo

Husqvarna EZ4220 - Replacing the Fuel Filter; Checking the Fuel Pumps Air Filter; Checking Tire Pressures

Husqvarna EZ4220
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English-45
MAINTENANCE
Replacing the Fuel Filter
Replace the line-mounted fuel filter every 100 hours
(once per season) or more regularly if it is clogged.
Replace the filter as follows:
1. Move the hose clamps away from the filter. Use
flat-nosed pliers.
2. Pull the filter loose from the hose ends.
3. Push the new filter into the hose ends. Position the
filter with the “FLOW” arrow pointing up toward the
fuel pump. If necessary, a soap solution can be
applied to the filter ends to ease mounting.
4. Move the hose clamps back toward the filter.
Checking the Fuel Pump’s Air Filter
Regularly check that the fuel pump’s air filter is free
from dirt.
Remove the screws and open the pump, no hoses
need be removed.
The filter can be cleaned with a brush if necessary.
Replace the filter on the console.
Checking Tire Pressures
All four tires shall have a pressure of 15 psi / 103 kPa /
1 bar.
8011-729
Fuel Filter
8009-147
The fuel pump’s air filter
8011-564
Tire pressures

Table of Contents

Related product manuals