Husqvarna FC 450 2023 User Manual

13 WHEELS, TIRES
108
13.1 Removing the front wheel
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 55)
J00082-10
Main work
(All models apart from Rockstar Edition)
– Manually press the brake caliper toward the brake disc to
push back the brake pistons.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
A01272-10
–
Loosen screw
1
by several rotations.
–
Loosen screws
2
.
–
Press on screw
1
to push the wheel spindle out of the
axle clamp.
–
Remove screw
1
.
A01201-10
Warning
Danger of accidents Damaged brake discs
reduce the braking effect.
– Always lay the wheel down in such a way that
the brake disc is not damaged.
– Hold front wheel and remove wheel spindle. Take the
front wheel out of the fork.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
A01188-11
–
Remove spacers
3
.

Husqvarna FC 450 2023 Specifications

General

Displacement	449.9 cc
Bore x Stroke	95 mm x 63.4 mm
Starter	Electric starter
Transmission	5-speed
Rear Suspension	WP XACT Monoshock with linkage
Front Brake	Disc brake, 260 mm
Rear Brake	Disc brake, 220 mm
Ground Clearance	370 mm
Compression Ratio	13.1:1
Front Brake Manufacturer	Brembo
Rear Brake Manufacturer	Brembo
Engine Type	4-Stroke, Single Cylinder
Front Suspension	WP XACT USD, Ø 48 mm
Fuel Tank Capacity	7.2 liters