To Next Page
A
Aaron CookJul 25, 2025
Why does my Husqvarna FS5000 D Saw engine stop during operation?
- MMichael FrazierJul 25, 2025
Your Husqvarna Saw engine might stop for several reasons: * The fuel tank could be empty. The display will show a warning symbol. To fix this, refill the fuel tank with the correct fuel type. * The water safety switch may have stopped the engine due to lack of water pressure, indicated by a warning symbol and message on the display. Disengage the water safety switch and check the water supply. * The machine stop button might be pushed down, also shown by a warning symbol and message. Pull the machine stop button up to reset it. * There might be too high a load on the cutting blade. Listen to the engine; if the speed decreases, pull the lever for speed control rearward. * A fuse could be broken. In this case, replace the broken fuses.
General
