Why does my Husqvarna GT48XLS Lawn Mower engine click but not start?
If your Husqvarna Lawn Mower engine clicks but won't start, the issue might be a weak or dead battery, so recharge or replace it. Also, check for corroded battery terminals and clean them. Inspect all wiring for looseness or damage. A faulty solenoid or starter could also be the problem, so check or replace them as needed.
Why is my Husqvarna GT48XLS vibrating so much?
If your Husqvarna Lawn Mower is vibrating excessively, check for a worn, bent, or loose blade. Replace the blade and tighten the blade bolt if necessary. Also, inspect the blade mandrel and replace it if bent. Tighten any loose parts and replace any damaged parts.
Why won't the blades rotate on my Husqvarna Lawn Mower?
If the mower blades on your Husqvarna Lawn Mower won't rotate, check for an obstruction in the clutch mechanism and remove it. Also, inspect the mower drive belt and replace it if worn or damaged. Replace a frozen idler pulley or blade mandrel.
General| Manufacturer | Husqvarna |
|---|---|
| Cylinders | 2 |
| Cutting Width | 48 inches |
| Transmission | Hydrostatic |
| Transmission Manufacturer | Hydro-Gear |
| Number of Speeds | Infinite |
| Drive | 2WD |
| Blades | 3 |
| Deck Material | Steel |
| Blade Engagement | Electric |
| Warranty | 3 years |
To Next Page
