To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna GTH264T and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Cylinders | 2 |
| Transmission | Hydrostatic |
| Transmission Manufacturer | Hydro-Gear |
| Deck Material | Steel |
| Drive | 2WD |
| Cutting Height, min | 1.5 inches |
| Blade Engagement | Electric |
| Engine | Briggs & Stratton |
| Transmission Type | Automatic |
Understand controls and proper use before operating the machine.
Inspect and prepare the machine and area before use, handling fuel safely.
Guidelines for safe operation, including slopes, traffic, and engine use.
Procedures for keeping the equipment in good condition and storing it properly.
Details on parts that need to be assembled before the tractor can be used.
Instructions for adjusting the seat to a comfortable and safe operating position.
Overview of the tractor's control panel layout and component locations.
Explains the operation of brake, forward, and reverse drive pedals for machine movement.
Details on attachment clutch engagement and cutting unit lift/lower lever.
Information on ignition lock positions and parking brake engagement/disengagement.
Guide to using choke, starter, and free-wheel lever for engine start and movement control.
Guidance on cruise control usage, service minder, and battery status indicators.
Instructions for safely refueling the engine with unleaded petrol outdoors.
Procedure for checking and maintaining the correct engine oil level.
Guidance on checking and maintaining proper tire inflation for safe operation.
Steps for safely starting the tractor engine with the operator seated and brake applied.
Procedure to remove trapped air from the transmission before initial operation.
How to control machine direction and speed using the drive pedals.
Instructions for lowering the cutting unit and selecting an appropriate driving speed.
Explanation of the safety system allowing reverse operation with attachment engaged.
Advice on mowing techniques, clearing obstacles, and achieving optimal cut results.
Important safety warnings and precautions for operating the tractor on terrain with slopes.
Steps for safely shutting down the tractor engine and disengaging components.
Critical safety steps including disconnecting power and engaging brakes before servicing.
Instructions for removing and reinstalling the engine hood for access.
Periodic maintenance tasks for engine, tractor, and mower components based on usage.
Procedures for cleaning the tractor, engine, and steering plate to maintain performance.
Warnings to avoid injury from pinch points and moving parts during maintenance.
Step-by-step guide for draining old oil and replacing it with new oil.
Step-by-step instructions for removing the mower drive belt and related components.
Step-by-step instructions for installing the new mower drive belt and related components.
Instructions for assembling the cutting unit after belt replacement or for general setup.
How to visually adjust mower height for even cutting on both sides.
Precise method for adjusting mower height side-to-side for level cutting.
How to adjust the mower deck height front-to-back for optimal cutting results.
Issues preventing the engine from starting or turning over, and related causes.
Problems with uneven running, overheating, or lack of power.
Faults related to battery charging and lighting function.
Problems with uneven cutting results or abnormal machine vibration.
Procedures for cleaning, oil change, fuel draining, and battery care before storing.
Details needed for ordering spare parts and contacting dealers for service.
