EasyManua.ls Logo

Husqvarna GTH52XLS - User Manual

Husqvarna GTH52XLS
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
English/Spanish
115 77 73-26
Operator’s Manual
Manual de Operario
GTH52XLS
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Esta máquina puede utilizar gasolina con un con-
tenido de hasta el 10% de etanol (E10). El uso de una
gasolina que supere el 10% de etanol (E10) anulará la
garantía del producto.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
Por favor lea cuidadosamente y comprenda
estas intrucciones antes de usar esta maquina.

Questions and Answers

  • T
    Timothy CurrySep 23, 2025
    What causes my Husqvarna GTH52XLS Lawn Mower engine to keep running when I leave the seat?
    • D
      Dr. Jackson McphersonSep 23, 2025
      If your Husqvarna Lawn Mower engine continues to run when you leave the seat with the attachment clutch engaged, it indicates a faulty operator-safety presence control system. Check the wiring, switches, and connections.
  • J
    Jessica WoodsAug 25, 2025
    How to fix a hard to start Husqvarna Lawn Mower?
    • G
      gbennettAug 25, 2025
      If your Husqvarna Lawn Mower is hard to start, the issue might stem from a dirty air filter, so try cleaning or replacing it. A bad spark plug could also be the reason, so replace it if necessary. If the battery is weak or dead, recharge or replace it. Another potential cause is a dirty fuel filter, which should be replaced. Stale or dirty fuel can also make it hard to start, so empty the fuel tank and refill it with fresh, clean gas. Additionally, check all wiring for looseness or damage. If none of these steps resolve the issue, the engine valves may be out of adjustment, requiring assistance from an authorized service center.
  • N
    Nicole WrightAug 25, 2025
    What to do if engine will not turn over on Husqvarna Lawn Mower?
    • E
      Emma ZimmermanAug 26, 2025
      If your Husqvarna Lawn Mower engine won't turn over, ensure the brake pedal is depressed. Also, disengage the attachment clutch. If these aren't the issue, check the battery; recharge or replace it if it's weak or dead. A blown fuse could also be the problem, so replace it if necessary. Clean any corrosion from the battery terminals. Inspect all wiring for looseness or damage. Check or replace a faulty ignition switch, and check or replace a faulty solenoid or starter. If the problem persists, there may be faulty operator presence switch(es), requiring you to contact an authorized service center.
  • K
    Karen HollowayAug 26, 2025
    How to prevent engine backfires when turning off Husqvarna Lawn Mower?
    • P
      Phillip HenryAug 27, 2025
      To prevent your Husqvarna Lawn Mower engine from backfiring when turning it off, move the throttle control between half and full speed (fast) position before stopping the engine.
  • K
    Kimberly WilliamsSep 23, 2025
    Why does my Husqvarna Lawn Mower engine die when I shift into reverse?
    • A
      Austin HoltSep 23, 2025
      Your Husqvarna Lawn Mower engine might die when shifted into reverse if the Reverse Operation System (ROS) is not 'ON' while the mower or other attachment is engaged. Turn the ignition key to the ROS 'ON' position.
  • M
    Michael ColemanSep 12, 2025
    Why headlight(s) not working on Husqvarna Lawn Mower?
    • D
      davismichaelSep 12, 2025
      If the headlight(s) on your Husqvarna Lawn Mower aren't working, first ensure the switch is turned 'ON'. If that's not the problem, the bulb(s) or lamp(s) may be burned out, so replace them. A faulty light switch could also be the cause, so check or replace it. Inspect the wiring and connections for looseness or damage. Lastly, check if a fuse has blown and replace it if necessary.
  • W
    wbowmanSep 12, 2025
    Why Husqvarna GTH52XLS Lawn Mower has loss of drive?
    • C
      carla48Sep 13, 2025
      If your Husqvarna Lawn Mower experiences a loss of drive, first check if the freewheel control is in the 'disengaged' position and place it in the 'engaged' position. If equipped, check for debris on the steering plate. A worn, damaged, or broken motion drive belt can also cause loss of drive, so replace it. Air trapped in the transmission during shipment or servicing might be the problem, so purge the transmission. Finally, check for a missing axle key and install it at the rear wheel.
  • S
    Sophia CarsonSep 5, 2025
    Why does my Husqvarna GTH52XLS engine click but not start?
    • R
      Raymond RobinsonSep 5, 2025
      If your Husqvarna Lawn Mower engine clicks but doesn't start, the battery may be weak or dead, so recharge or replace it. Also, check for corroded battery terminals and clean them. Loose or damaged wiring can also cause this issue, so inspect all wiring. A faulty solenoid or starter could also be the culprit, and it may need to be checked or replaced.
  • R
    Ruben Roberts MDSep 2, 2025
    How to fix poor cut (uneven) of Husqvarna GTH52XLS?
    • C
      Christopher TaylorSep 2, 2025
      If your Husqvarna Lawn Mower has a poor and uneven cut, the blade may be worn, bent, or loose; replace the blade and tighten the blade bolt. The mower deck might not be level, so level it. Check for buildup of grass, leaves, or trash under the mower and clean it. A bent blade mandrel could also be the cause, so replace it. Clean clogged mower deck vent holes around the mandrels.
  • J
    Jesus BergSep 3, 2025
    What to do if battery will not charge on Husqvarna GTH52XLS Lawn Mower?
    • T
      Tiffany RushSep 3, 2025
      If the battery on your Husqvarna Lawn Mower won't charge, it could be due to bad battery cells, so replace the battery. Poor cable connections can also prevent charging, so check and clean all connections. If equipped, a faulty regulator could be the issue, so replace it. Alternatively, the alternator might be faulty, requiring replacement.

Husqvarna GTH52XLS Specifications

General IconGeneral
Cutting Width52 inches
TransmissionHydrostatic
Deck MaterialSteel
Blade EngagementElectric
Cylinders2
Warranty3 years
Cutting Height1.5 - 4 inches
Turning Radius16 inches
Tire Size, front16x6.5x8

Related product manuals