To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna LC56 and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | LC56 |
| Category | Lawn Mower |
| Language | English |
Read instructions carefully and familiarize with controls before using the machine.
Inspect the area, handle fuel safely, and check mower parts before operation.
Mow safely, follow slope rules, and stop the engine when necessary.
Ensure fasteners are tight, store safely, and check components regularly.
Pull up the handle and tighten wing-nuts to secure it in place.
Insert frame, slip bindings, and secure catcher with the rear door.
Configure mower for rear bagging, mulching, or side discharging.
Set the desired cutting level using the lever at each wheel.
Check oil level using dipstick and top up if necessary.
Follow correct procedure for safe engine start, operation, and stop.
Operate mower on flat ground; avoid slopes over 15 degrees.
Perform regular checks, clean air filter, and follow annual service guidelines.
Sharpen and balance the cutter blade after the season for optimal performance.
Clean or replace the air filter regularly to ensure proper engine function.
Tighten the cable nut to adjust the mower's ground speed.
Prepare for transport by draining fluids and removing spark plug lead.
