EasyManua.ls Logo

Husqvarna LP 6500 I - User Manual

Husqvarna LP 6500 I
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LP 6500 I
EN Operator's manual 2-19
Question and Answer IconNeed help?

Do you have a question about the Husqvarna LP 6500 I and is the answer not in the manual?

Summary

Introduction and Product Overview

Product Overview

Detailed look at the compactor's components and layout.

Control Panel Overview

Explanation of the controls and indicators on the operator's panel.

Product Description and Intended Use

Details about the compactor and its specified professional applications.

Symbols on the Product

Identifies and explains the various safety and operational symbols used on the equipment.

Safety Information and Precautions

Type Plate and Product Liability

Information found on the identification plate and manufacturer liability conditions.

Safety Definitions and General Instructions

Explains warning types and provides general safety guidelines for operators.

Safety Instructions for Operation

Specific safety precautions to be followed during product operation.

Vibration, Dust, and Exhaust Fumes Safety

Precautions related to vibrations, dust, and hazardous exhaust fumes.

Noise, PPE, and Safety Devices

Information on noise safety, recommended protective gear, and safety features.

Emergency Stop, Fuel, and Battery Safety

Critical safety measures for emergency stops, fuel handling, and battery use.

Operation on Slopes and Near Edges

Safety guidelines for operating on inclines and near edges.

Product Operation

Pre-Operation Checks and Handle Setup

Before-use checks and instructions on adjusting the handle for operation.

Adjusting Handle Height

Steps to adjust the handle height for operator comfort and control.

Starting the Product

Procedures for starting the engine manually or with an electric start.

Operating and Stopping the Product

How to control the product's movement, vibration, and safely stop it.

Maintenance Procedures

Maintenance Introduction and Schedule

Safety advice before maintenance and a schedule for general product upkeep.

General Product Maintenance

Routine checks and maintenance tasks for the product.

Engine Maintenance

Regular maintenance procedures for the engine and its components.

Component Checks and Replacements

How to check scrapers, clean the product, and maintain specific parts.

Fluid and Filter Maintenance

Procedures for checking engine oil, replacing filters, and draining the water separator.

Air Filter and Eccentric Element Maintenance

Instructions on maintaining the air filter and changing oil in the eccentric element.

Hydraulic System and Fuel Filter Maintenance

Hydraulic System Checks

How to check hydraulic hoses and oil level for proper system function.

Replacing Hydraulic Oil

Steps for draining and refilling the hydraulic oil.

Fuel Filter and Battery Maintenance

Procedures for replacing the fuel filter and checking/charging the battery.

Transportation, Storage, and Disposal

Transportation and Lifting

Safety instructions for transporting and lifting the product.

Storage and Disposal

Guidelines for storing the product and environmentally sound disposal.

Technical Data and Dimensions

Technical Specifications

Detailed technical specifications for the engine, performance, and fluids.

Product Dimensions

Measurements and diagrams detailing the product's physical dimensions.

Husqvarna LP 6500 I Specifications

General IconGeneral
BrandHusqvarna
ModelLP 6500 I
CategoryVibratory rammers & tampers
LanguageEnglish

Related product manuals