To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna M-ZT 61 and is the answer not in the manual?
General| Engine Manufacturer | Kawasaki |
|---|---|
| Engine Name | FR Series |
| Engine Type | V-Twin |
| Engine Power | 24 hp |
| Cutting Width | 61 inches |
| Cutting Deck Type | Fabricated |
| Transmission Type | Hydrostatic |
| Weight | 770 lbs |
| Deck Material | Steel |
| Cutting Methods | Mulching/Side discharge |
| Cutting Height | 1.5 - 5 in |
| Warranty | 3 years |
| Fuel Capacity | 5 gallons |
Details specific requirements for the USA, including emission rules.
Defines terms like left/right and notes product design changes.
Guidelines for transporting the mower on public roads, emphasizing safety and regulations.
Precautions and guidelines for towing the machine, including safety and weight limits.
Details the intended use of the machine, safety practices, and operator qualifications.
Information on Husqvarna's sales network and authorized service for support.
Location and details of machine, engine, and transmission manufacturing numbers.
General safety warnings and instructions to prevent serious injury or death.
Precautions to keep children safe from the mower and its operation.
Guidelines for safe operation, including reading the manual and clearing the work area.
Recommends specific PPE such as footwear, eye protection, and hearing protection.
Critical safety advice for operating the mower on inclines and uneven terrain.
Detailed instructions for safely refueling the machine, preventing fire and explosion.
Guidelines for maintaining the machine's condition, safety labels, and components.
Procedures and safety precautions for loading, unloading, and transporting the mower.
Further details on towing precautions, avoiding jack-knifing, and weight limits.
Information on the spark arrestor requirement for certain operating environments.
Instructions and warnings regarding the use and maintenance of the ROPS and seat belt.
Detailed explanation of how to operate the steering controls for movement and turning.
Instructions on how to engage and disengage the park brake for safe operation.
Explanation of how the throttle controls engine speed and blade rotation.
How to use the choke control for starting a cold engine.
How to engage and disengage the mower blades.
How to start and stop the engine, and use for headlights.
Explains the function of the service meter for tracking engine hours and maintenance needs.
How to adjust the seat position for operator comfort.
Location and identification of fuses for the mower deck and primary circuits.
How to set and adjust the cutting height using the pedal.
Location and operation of the fuel shut off valve.
How to adjust the mower for straight tracking.
Information about the fuel tank capacity, type of fuel, and safety precautions.
Operation of hydro release levers for moving the mower by hand.
Initial training advice for new operators of zero-turn mowers.
Detailed explanation of mower steering mechanics and maneuvers.
Proper use of the roll bar and seat belt for operator safety.
Pre-operation checks and preparations before starting the mower engine.
Step-by-step instructions for safely starting the mower's engine.
Procedures for safely operating the mower after the engine has started.
How to properly shut down and stop the mower's engine.
Critical safety guidelines and techniques for mowing on slopes.
Troubleshooting steps for a weak battery and using jumper cables.
Advice for optimizing mowing performance and lawn care.
Instructions for safely pushing or pulling the mower when the engine is off.
A comprehensive schedule of maintenance tasks and intervals.
Explains the safety interlock system preventing starting or driving under certain conditions.
Information on blade sharpness, damage, and replacement procedures.
How to visually check and adjust the park brake.
Recommended tire pressure for optimal performance and safety.
Maintenance, charging, and replacement of the mower battery.
Maintenance and replacement of caster wheels, including torque specs.
Inspection and replacement of V-belts.
Procedures for removing and installing the mower deck belt.
Procedures for removing and installing the pump belt.
Instructions for leveling the mower deck for optimal cutting performance.
How to clean the mower deck and underside for longevity.
Daily check for loose or missing hardware.
Proper adjustment of anti-scalp rollers to prevent deck scalping.
External maintenance checks for the ZT-3400 Powertrain.
A schedule detailing lubrication points and intervals.
How to lubricate various zerks on the wheels and deck.
Step-by-step instructions for changing the engine oil.
Procedures for changing the transaxle fluid and filter.
How to purge air from the hydrostatic transmission system.
Steps to properly store the mower for the winter or long periods.
Technical specifications for the mower's engine.
Technical specifications for the mower's transmission.
Technical specifications related to the mower's frame and cutting deck.
Physical dimensions of the mower.
Recommended torque values for various fasteners on the machine.
Checklist for initial delivery service and customer information.
Maintenance tasks to be performed after the first 10 hours of operation.
Routine daily maintenance checks and cleaning procedures.
Maintenance tasks required every 50 hours of operation.
Maintenance tasks to be performed every 250 hours of operation.
Maintenance tasks to be performed every 500 hours of operation.
Annual maintenance tasks for the mower.
