To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna M53-150WFP and is the answer not in the manual?
General| Cutting Width | 53 cm |
|---|---|
| Cutting Height Adjustment | Central |
| Drive Type | Self-propelled |
| Engine Manufacturer | Briggs & Stratton |
| Engine Type | 4-stroke |
| Displacement | 163 cm³ |
| Cutting Height Steps | 6 |
| Weight | 33 kg |
| Grass Collector Volume | 70 l |
| Cutting Height, min-max | 25-75 mm |
Understand controls, never allow untrained users, keep bystanders away.
Inspect area, wear protective gear, and prepare machine before mowing.
Guidelines for mowing on slopes, avoiding hazards, and stopping the engine.
Pull up the handle and tighten wing-nuts as per diagram.
Loosen T-knob, pull rope, and retighten knob.
Assemble catcher frame into bag, slip bindings, and secure to housing.
Install grass catcher for rear bagging operation.
Close rear door for mulching mode.
Install discharge deflector for open discharge.
Set desired cutting level by moving levers at each wheel.
Regularly check oil level using dipstick; avoid overfilling.
Control forward drive with the clutch bar at the top of the handle.
Do not use on slopes over 15° to prevent engine lubrication issues.
Disconnect spark plug lead before any work. Check screws and oil level.
Grind and balance the cutter blade annually after the season.
Empty fuel tank and remove spark plug lead before transport.
