Husqvarna MZ 48 - Technical Machine Specifications; Engine Specifications; Transmission Specifications; Frame and Dimension Details

ENGINE
Manufacturer Kawasaki
Type FR691V
Power
17.2 kW @ 3600 RPM
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 18,9 liters
Cooling Air cooled
Air lter Heavy Duty Cartridge
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission ZT-3100
Steering control Dual levers, foam gripped
Speed forward 0-13,7 km/h
Speed reverse 0-7,2 km/h
Brakes Mechanical
Front caster tires 13 x 6,5-6
Rear tires, turf pneumatic 22 x 10-10
Tire pressure 103 kPa (1 bar)
FRAME
Cutting Width 122 cm
Cutting Height 3,8-11,4 cm
Number of Blades 3
Blade Length 41,8 cm
Nose roller Yes
Seat Spring
Hinged Arm Rests Yes
Service Meter Digital
Blade Engagement Ogura GT48
Deck Construction 10 gauge fabricated
Productivity
11, 088 m
2
/h
DIMENSIONS
Weight 335 kg
Base Machine Length 192 cm
Base Machine Height 107 cm
Base Machine Width 125 cm
Overall Width, Chute Up 114 cm
Overall Width, Chute Down 155 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
34
TECHNICAL DATA