English-34
OPERATION
Stopping the Engine
Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
Disengage the mower deck by depressing •
the blade switch.
8061-013
Disengage the mower deck and move throttle to minimum
8061-011
Cut height selection
Raise the mower deck by pressing the foot •
pedal forward to the transport position.
When the machine is standing still, activate •
the parking brake by pulling the lever
upward.
Move the throttle to the minimum position •
(tortoise symbol). Turn the ignition key to the
stop position.
8061-011
Place controls in neutral position to stop
Move the steering controls outward.•
Remove key. Always remove key when •
leaving the mower to prevent unauthorized
use.
To Next Page
Loading...
