To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna MZ25 / 968999780 and is the answer not in the manual?
General| Cutting Height Range | 1.5 - 4.5 in |
|---|---|
| Deck Type | Fabricated |
| Transmission Type | Hydrostatic |
| Turning Radius | Zero |
| Warranty | 3 years |
Defines terms like forward/backward relative to the machine for clarity.
Outlines the intended use and general principles for safe operation of the mower.
Emphasizes the importance of safety warnings for injury prevention.
Covers safe practices for using the mower, including clearing the area and operator responsibilities.
Lists essential protective gear for operators to prevent injury during use.
Details precautions and techniques for safe mowing on inclines to avoid tip-overs.
Provides guidelines for safely storing, transporting, and fueling the machine.
Identifies the placement of all major operating controls on the machine.
Explains how to operate the machine's direction and speed using dual levers.
Describes the function and operation of the parking brake for securing the machine.
Details the use of the ignition key for starting and stopping the engine.
Information on capacity, fuel type, and safe refueling practices.
Guidance for new users to become familiar with the mower's unique maneuverability.
Step-by-step instructions for safely starting the mower's engine.
Procedures for operating the mower, including speed control and turning.
Instructions for safely shutting down the mower's engine.
Outlines routine service intervals and tasks for optimal performance.
Instructions for cleaning, charging, and replacing the battery.
Procedures for servicing the air cleaner to maintain engine performance.
Guidance on blade condition, sharpening, and replacement for cutting quality.
Steps for leveling the deck for an even mowing result.
Procedure for checking and maintaining the correct engine oil level.
Instructions for changing the hydraulic fluid and purging the system.
Common causes and solutions for engine starting failures.
Diagnosing and resolving issues with machine movement.
Identifying factors contributing to poor cut quality.
Steps for preparing the mower for long-term storage to prevent damage.
Values for tightening various fasteners during assembly or repair.
Details the coverage period and terms for product defects.
Lists conditions and actions that void the warranty.
Outlines the steps for claiming warranty service.
