EasyManua.ls Logo

Husqvarna MZ5424S - Operation: Engine Start and Warnings; Engine Starting Procedure (Continued); Engine Exhaust Emissions Warning

Husqvarna MZ5424S
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
28
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
about 10 seconds before retrying.
8058-161
Set the throttle
WARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth
defects or other reproductive system
damage. The engine exhaust contains
carbon monoxide, an odorless,
colorless, poisonous gas. Do not use
the machine in enclosed spaces.
8. Press in and turn the ignition key to the start
position.
8050-780
Turn to the start position
8050-781
Return to run position
9. When the engine starts, immediately release the
ignition key back to the run position.
10. Slowly push in the choke control knob, if it was
used to start a cold engine.
11. Set the engine speed with the throttle. Allow the
engine to run at a moderate speed, approximately
mid throttle, for 3-5 minutes before loading it too
heavily. USE FULL THROTTLE WHEN MOWING
(no choke).

Other manuals for Husqvarna MZ5424S

Related product manuals