Husqvarna MZ5424SR CA User Manual

Gasoline containing up to
10% ethanol (E10) is acceptable
for use in this machine.
The use of any gasoline exceeding
10% ethanol (E10) will void the
product warranty.
Operator Manual
MZ5424SR CA / 967003902
Please read the operator manual carefully and make sure
you understand the instructions before using the machine.

Husqvarna MZ5424SR CA Specifications

General

Engine Manufacturer	Kawasaki
Transmission Type	Hydrostatic
Transmission Manufacturer	Hydro-Gear
Deck Material	Fabricated Steel
Cutting Width	54 inches
Cutting Height	1.5 - 4.5 inches
Blade Tip Speed	18, 500 ft/min
Seat Type	High Back
Turning Radius	Zero
Warranty	3 years

Summary

Safety Instructions and Precautions

General Safety Instructions

Core safety advice for operation, maintenance, and general machine use.

Personal Safety Equipment

Details required personal protective equipment for operator safety.

Slope Operation and Children Safety

Precautions for mowing on inclines and protecting children.

Fuel Handling and Maintenance Safety

Safe practices for gasoline and during machine maintenance.

Transport, Towing, and ROPS Safety

Machine Controls and Components

Control Panel Overview

Steering and Motion Control Levers

Starting, Fuel, and Adjustment Controls

Operating Your Mower

Operator Training and Starting Procedures

Guidance for new users, steering, and step-by-step engine starting.

Mowing Techniques and Hill Operation

Maintenance Procedures

Maintenance Schedule and Intervals

Recommended service tasks and their frequencies for optimal machine condition.

Belt, Blade, and Deck Servicing

Battery, Tires, and Safety System Checks

Lubrication Guide

Lubrication Schedule and General Guide

Component Lubrication and Transaxle Fluid

Troubleshooting Common Issues

Engine Start and Performance Problems

Diagnosing and resolving engine start, running, and performance issues.

System and Mowing Problem Diagnosis

Troubleshooting vibration, overheating, electrical, and mowing results.

Storage Preparation

Technical Data and Specifications

Engine, Transmission, and Frame Specifications