To Next Page
K
Kristen WilliamsAug 19, 2025
What to do if there is a power fault in Husqvarna Power Supply?
- KkerryphamAug 20, 2025
If the Husqvarna Power Supply indicates a power fault, check the fuses and the generator.
What to do if there is a power fault in Husqvarna Power Supply?
If the Husqvarna Power Supply indicates a power fault, check the fuses and the generator.
Why Husqvarna Power Supply has no power, because the product is too hot?
If the Husqvarna Power Supply has no power because it is too hot, allow both the product and the connected power tool to cool down.
What to do if Husqvarna Power Supply warns that the product can be too hot?
If the Husqvarna Power Supply shows a warning that it might be too hot (either 1-phase or 3-phase), you should check the cooling water and decrease the load.
What to do if there is a fault in the connected tool with Husqvarna Power Supply?
If there is a fault in the connected tool, you should check the connected tool.
What to do if machine stop button is pushed down and Husqvarna Power Supply is in sleep mode?
If the machine stop button is pushed down, and the Husqvarna Power Supply is in sleep mode, reset the product and make sure that the machine stop button is released.
What to do if Husqvarna Power Supply shows incorrect situation?
If the Husqvarna Power Supply shows an incorrect situation, restart the product. If the product still does not start, speak to a Husqvarna service agent.
What to do if Husqvarna Power Supply reports a ground fault?
If the Husqvarna Power Supply has a ground fault, change the tool and restart the product. If the product does not start, speak to a Husqvarna service agent.
What to do if function test of LED at connection of power takes less than 3 seconds in Husqvarna Power Supply?
To address the function test of LED at connection of power lasting less than 3 seconds, do a check of the machine stop button. Refer to To do a check of the machine stop button on page 7.
What to do if Husqvarna Power Pack has no power because it is too hot?
If the Husqvarna Power Pack is too hot, allow both the product and the connected power tool to cool down.
What to do if machine stop button is pushed down on Husqvarna PP 70 Power Pack?
If the machine stop button on your Husqvarna Power Pack is pushed down and the product is in sleep mode, reset the product and make sure that the machine stop button is released.
User's duty to ensure operators understand the manual and safety.
Overview of the power pack and its embedded connectivity features.
FCC and IC compliance notes and conditions for operation.
Specifies the intended applications for the power pack.
Diagram of components and explanation of product safety symbols.
Explains manual terminology and provides general power tool safety advice.
Guidelines for safe operating environment and electrical connections.
Advice on operator awareness, alertness, and common sense.
Proper techniques for using, maintaining, and servicing power tools.
Precautions for operating the product safely, including training and medical implants.
Recommended protective gear for operating the product.
Information on product safety features like RCD and stop button.
Procedures to verify the functionality of the stop button and RCD.
Precautions and guidelines before performing maintenance.
Essential steps before starting product operation, including reading manual and PPE.
Instructions for downloading and using the Husqvarna Fleet Services app.
Steps for connecting the product to power and water supply.
Procedure for connecting the power tool to the power pack.
Steps to safely start and stop the power pack.
Explanation of the different indicator lamps and their meanings.
Routine checks and cleaning procedures for daily operation.
Information regarding the USB port and its usage by service personnel.
Detailed guide to interpreting status lamps for resolving issues.
Explains the meaning of various light patterns on the control panel.
Steps for diagnosing no power and performing LED function tests.
Diagnosing standby mode, phase selection, and power fault conditions.
Solutions for when the tool is unknown or the product is in sleep mode.
Diagnosing hardware faults, ground faults, and overheating issues.
Instructions for safely transporting the product to prevent damage.
Guidelines for storing the product securely and in appropriate conditions.
Details on output, current, voltage, and power supply types.
Technical details of the BLE technology radio spectrum.
Recommended generator outputs for different operational scenarios.
Measurements (Width, Height, Length) of the product.
Details on available adapters for different markets and tool connections.
Information on finding and using approved service centers for repairs.
FCC and other regulatory compliance information.
Information on the use of Bluetooth registered trademarks.
General| Brand | Husqvarna |
|---|---|
| Model | PP 70 |
| Category | Power Pack |
| Language | English |
