To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna QC250 and is the answer not in the manual?
Explains various symbols used on the product for user guidance and safety.
Used if there is a risk of injury or death for the operator or bystanders.
Used if there is a risk of damage to the product or surroundings.
Read all instructions and warnings. Failure to comply may lead to injury or damage.
Use only specified chargers for original batteries. Do not disassemble or repair.
Avoid metal contact. Use grounded sockets. Inspect power cord regularly for damage.
Keep cables away from water/oil. Do not clean with water. Keep charger away from children.
Do not use in wet conditions or during lightning. Use indoors with good ventilation.
Do not use near flammable materials. Do not cover charger during operation.
Children aged 8+ and those with reduced capabilities may use under supervision.
Connect charger to outlet, then battery. Remove when fully charged. Disconnect plug.
Indicates a permanent battery charger error. Contact dealer.
Indicates temperature deviation. Let battery cool/warm up.
Indicates a faulty battery. Contact dealer.
Indicates a blown fuse. Replace fuse in 12V plug.
General| Output Voltage | 36V |
|---|---|
| Charging Current | 2.5 A |
| Battery Voltage | 36V |
| Battery Type | Li-ion |
| Battery Compatibility | Husqvarna batteries |
| Input Voltage | 100-240V AC |
| Charging Time | Varies depending on battery capacity (e.g., 4Ah battery charges in approximately 80 minutes) |
