Husqvarna R 214C - Technical Data; Product Dimensions; Engine Specifications

Technical data
Technical data
R 214 R 214C
Dimensions
Length without cutting deck, mm 1942 1960
Width without cutting deck, mm 883 883
Length including cutting deck
1
, mm 2243 2227
Width including cutting deck
1
, mm 994 994
Height, mm 1120 1120
Weight without cutting deck, with empty tank, kg 192 192
Weight including cutting deck
1
, with empty tank, kg 228 228
Wheel base, mm 887 887
Track width, front, mm 712 712
Track width, rear, mm 627 627
Tire dimensions 16.5×6.0×8 16.5×6.0×8
Tire pressure, rear – front, kPa / bar / PSI 60 / 0.6 / 8.5 60 / 0.6 / 8.5
Max. gradient, degrees ° 10 10
Engine
Brand / Model Husqvarna / HS 452AE Husqvarna / HS 413AE
Nominal engine output, kW
2
9.5 8.4
Displacement, cm
3
452 413
Max. engine speed, rpm 3000 ± 100 3000 ± 100
Forward speed, km/h 0–9 0–9
Reverse speed, km/h 0–6 0–6
Fuel, min. octane grade 91 91
Tank volume, liters 12 12
Oil Class SF, SG, SH or SJ
SAE40, SAE30,
SAE10W-30, SAE10W-40
or SAE5W-20
Class SF, SG, SH or SJ
SAE40, SAE30,
SAE10W-30, SAE10W-40
or SAE5W-20
Oil volume incl. filter, liters 1.4 1.4
Oil volume excl. filter, liters 1.2 1.2
1
Measured with cutting deck Combi 94
2
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
1590 - 006 - 20.10.2021 29