Problem Cause
There is vibration in the product The blades are loose. See
To examine the blades on page 27
.
One or more of the blades are unbalanced. See
To examine the blades on page
27
.
The engine is loose.
The cutting result is unsatisfacto-
ry
The blades are blunt. See
To examine the blades on page 27
.
The grass is long or wet. See
To get a good cutting result on page 17
.
The cutting deck is skew.
There is grass blockage in the cutting deck. See
To clean the product on page
20
.
The tire pressure is different on the right and left sides. See
Tire pressure on
page 24
.
The product is operated at a too high speed. See
To get a good cutting result on
page 17
.
The engine speed is too low. See
To get a good cutting result on page 17
.
The drive belt slips.
Display - Troubleshooting
Symbol Name
Indication on the dis-
play
Sound Cause
Slope indicator
The symbol shows. -
You operate the product in a
slope >10°. Refer to
To cut grass
on slopes on page 11
.
The symbol flashes. -
You operate the product in a
slope >15°. Refer to
Safety in-
structions for operation on page
9
.
Oil pressure sensor The symbol shows.
1 long
sound.
Low oil pressure. Refer to
To do
a check of the engine oil level on
page 27
.
Battery level indicator The symbol shows.
1 long
sound.
Low voltage. Refer to
To charge
the battery on page 23
.
Rotating blades indi-
cator
The symbol shows.
-
The drive of the blades is engag-
ed.
The symbol flashes. Incorrect start procedure. Refer
to
Start conditions on page 10
.
Parking brake indica-
tor
The symbol shows.
-
The parking brake engaged. Re-
fer to
Parking brake on page 10
.
The symbol flashes.
Incorrect start procedure. Refer
to
Start conditions on page 10
.
The symbol flashes
quickly.
Defective parking brake. Speak
to your Husqvarna servicing
dealer.
838 - 007 - 03.11.2021 31
To Next Page
Loading...
