Husqvarna R 316TX User Manual (English)

Questions and Answers:

E
emily87Aug 21, 2025
Why is the cutting result unsatisfactory with my Husqvarna R 316TX Lawn Mower?
- M
  Miss Carmen MooreAug 21, 2025
  If the cutting result of your Husqvarna Lawn Mower is unsatisfactory, several factors could be responsible. The blades might be blunt. The grass may be too long or wet. There could be grass blockage in the cutting deck. The tire pressure might be different on the right and left sides. The product may be operated at too high speed, or the engine speed may be too low. Also, the cutting deck could be skew.
J
Jenna KramerAug 23, 2025
Why is my Husqvarna Lawn Mower battery not charging?
- R
  Renee GordonAug 25, 2025
  If your Husqvarna Lawn Mower battery isn't charging, it could be defective or the connection at the cable connectors on the battery terminals is bad.
Q
qcookAug 26, 2025
Why does my Husqvarna Lawn Mower engine have no power?
- A
  Andrew GilmoreAug 26, 2025
  If your Husqvarna Lawn Mower engine appears to have no power, it may be due to a clogged air filter or dirt in the carburetor or fuel line.
C
Christopher MerrittAug 28, 2025
What to do if my Husqvarna Floor Machine engine does not start?
- T
  Teresa BeckerAug 28, 2025
  If the engine on your Husqvarna Floor Machine doesn't start even when the start motor turns it over, it might be due to a few common issues. Check if there is fuel in the fuel tank. Also, the spark plug or the ignition cable could be defective. Finally, there might be dirt in the carburettor or fuel line.
D
Donald StokesAug 30, 2025
Why is there vibration in my Husqvarna Lawn Mower?
- R
  robert63Aug 30, 2025
  If there is vibration in your Husqvarna Lawn Mower, the blades may be loose, or one or more of the blades may be unbalanced.
A
April Ortiz MDSep 1, 2025
Why doesn't the transmission have sufficient power in my Husqvarna Lawn Mower?
- M
  Mrs. Monica Stevenson DDSSep 1, 2025
  If the transmission of your Husqvarna Lawn Mower does not have sufficient power, the transmission cold air intake or the cooling fins may be blocked. Also, there might be no oil in the transmission, or the oil level is too low.
R
Robert DavisSep 3, 2025
Why doesn't my Husqvarna R 316TX Lawn Mower transmission have enough power?
- A
  Andrea BlackSep 3, 2025
  If your Husqvarna Lawn Mower transmission lacks sufficient power, the oil level might be too low, or there might be no oil in the transmission. Check the transmission oil level.
K
kenneth47Sep 5, 2025
What causes vibration in my Husqvarna Lawn Mower?
- S
  Shawn RiosSep 5, 2025
  If there is vibration in your Husqvarna Lawn Mower, the blades might be loose or unbalanced. Examine the blades.
J
james88Sep 7, 2025
Why doesn't the transmission of my Husqvarna R 316TX have sufficient power?
- S
  Steven ShawSep 7, 2025
  If your Husqvarna Lawn Mower transmission does not have sufficient power, the transmission cold air intake or the cooling fins might be blocked.
A
Andrew CervantesSep 9, 2025
Why won't the starter motor turn over on my Husqvarna Floor Machine?
- K
  Kimberly WilcoxSep 9, 2025
  If the starter motor on your Husqvarna Floor Machine doesn't turn the engine over, it could be due to several reasons. First, ensure that the parking brake is engaged. Next, check that the lift lever for the cutting deck is not in the mow position. Also, inspect the main fuse and replace it if it's blown. A weak battery or poor connection between the cable and the battery could also be the cause. Finally, the ignition lock or the starter motor itself might be defective.

Husqvarna R 316TX Specifications

General

Manufacturer	Husqvarna
Cutting Width	103 cm
Engine Manufacturer	Kawasaki
Transmission	Hydrostatic
Deck Material	Steel
Type	Lawn Mower
Engine Type	V-Twin
Engine Power	9.6 kW

Summary

Introduction and Product Information

Pre-delivery Inspection and Product Numbers

Verifies initial setup and identifies product serial details.

Product Description and Intended Use

Details the ride-on mower's capabilities and intended applications.

Insurance and Product Registration

Advises on securing insurance and registering the product.

Product Component Identification

Electrical System and Connectivity

Electrical System Components Overview

Details the battery, fuses, and wiring harness.

Husqvarna Connect Feature

Explains the functionality and benefits of the Husqvarna Connect app.

Operator Controls and Key Features

Pedals, Hour Meter, and Power Outlet

Describes the function of speed pedals, hour meter, and 12V power outlet.

Operator Presence Control (OPC)

Explains the safety feature that stops the engine/blades when the operator leaves the seat.

Cutting Deck Operation and Use

Explains the function and use of the Combi cutting decks.

Display and Product Symbols

Instrument Panel Indicators Explained

Details the various indicators and readouts on the mower's display panel.

Safety Symbols Interpretation

Explains the meaning of warning symbols found on the product.

General Safety Guidelines and Definitions

Safety Definitions and General Instructions

Defines warning terms and provides fundamental safety guidelines for operation.

Electromagnetic Field and Medical Implant Safety

Warns about potential interference with medical implants.

Safe Operating Procedures

Child Safety Precautions

Provides specific safety precautions related to children around the product.

General Operation and Slope Safety

Covers safe practices during mowing, including slopes and obstacles.

Reverse Operation Safety

Emphasizes looking behind and caution when moving in reverse.

Protective Equipment and System Checks

Personal Protective Equipment (PPE)

Recommends appropriate PPE for safe operation.

Safety Devices, Start Conditions, and Brake Checks

Details important safety devices, their checks, and starting requirements.

Specific Operational Safety Topics

Mowing on Slopes Safety Guidelines

Provides safety guidelines for mowing on inclines.

Fuel Handling and Storage Safety

Details safe handling and storage of fuel.

Safety, Assembly, and Maintenance Procedures

Battery, Transport, and Maintenance Safety

Covers safety for battery, transport, and maintenance procedures.

Assembly: Attaching the Cutting Deck

Step-by-step guide for attaching the cutting deck assembly.

Cutting Deck Attachment and Removal Procedures

Attaching the Cutting Deck

Detailed steps for securely attaching the cutting deck.

Removing the Cutting Deck

Detailed steps for safely removing the cutting deck.

Operation: Fueling and Connectivity Setup

Refueling Procedures and Safety

Instructions for safely filling the fuel tank.

Husqvarna Connect Setup Guide

Guide to downloading, registering, and connecting the app.

Operator Adjustments and System Engagement

Adjusting the Operator Seat and Steering Wheel

Instructions for adjusting the seat and steering wheel for comfort and safety.

Engaging and Disengaging the Drive System

How to engage and disengage the drive system for towing or operation.

Starting the Engine and Deck Control

Lifting and Lowering the Cutting Deck

Procedures for adjusting the cutting deck height for transport or mowing.

Starting the Engine Safely

Step-by-step guide to start the engine safely.

Mower Operation and Performance

Engine Warm-up and Throttle Control

Procedures for engine warm-up and using the throttle control.

Mowing Operation and Speed Control

Instructions on how to operate the mower and control speed.

Selecting and Adjusting Cutting Height

Guide to adjusting the cutting deck height.

Stopping Procedures and Cutting Quality

Stopping the Engine and Parking Brake

Procedures for safely stopping the engine and using the parking brake.

Achieving Optimal Cutting Results

Tips for optimal grass cutting performance.

Maintenance Schedule Overview

Product Preparation and Engine Maintenance

Covers initial checks and routine engine maintenance tasks.

Transmission and Cutting Equipment Maintenance

Outlines maintenance for transmission, controls, and cutting deck.

Detailed Maintenance Tasks

Engine Oil and Filter Maintenance

Details replacing engine oil and oil filter.

Transmission and Drive System Maintenance

Covers maintenance for transmission, filters, and drive systems.

Cutting Equipment Maintenance

Details cleaning and adjusting the cutting deck and blades.

Cleaning and Inspection Procedures

General Product Cleaning Guidelines

Instructions for cleaning the mower safely and effectively.

Cleaning Engine Air Intake and Muffler

Specific cleaning procedures for engine air intake and muffler.

Component Removal and Steering Checks

Removing Covers and Footrests

Steps to remove various covers and footrest plates for access.

Steering Wire Inspection and Adjustment

Procedure for inspecting and adjusting steering wire tension.

Filter and Spark Plug Maintenance

Replacing the Fuel Filter

Step-by-step guide to replace the fuel filter.

Air Filter Cleaning and Replacement

Instructions for cleaning or replacing the air filter.

Spark Plug Inspection and Replacement

Guide to checking and replacing the spark plug.

Electrical System Checks and Emergency Start

Spark Plug, Ignition, and Fuse Checks

Verifies spark plug, ignition cable, and main fuse integrity.

Battery Charging and Emergency Start

Instructions for charging the battery and performing an emergency start.

Jumper Cables, Tire Pressure, and Deck Positioning

Jumper Cable Removal and Tire Pressure

Steps for removing jumper cables and recommended tire pressure.

Putting Cutting Deck in Mow Position

Steps to lower the cutting deck for mowing.

Cutting Deck Adjustments and Alignment

Front Cover Attachment and Height Setting

Secures covers and sets cutting height.

Checking and Adjusting Cutting Deck Ground Pressure

Procedure to check and adjust cutting deck ground pressure.

Adjusting Cutting Deck Parallelism

Steps to ensure the cutting deck is parallel to the ground.

Cutting Deck Modifications and Blade Care

BioClip Plug Attachment and Removal

How to attach or remove the BioClip plug on cutting decks.

Blade Inspection, Sharpening, and Balancing

Guidance on examining blades for damage and balance.

Blade Replacement and Engine Oil Management

Replacing Mower Blades

Step-by-step instructions for replacing the cutting blades.

Checking and Maintaining Engine Oil Level

Procedure to check and maintain the engine oil level.

Engine Oil Change and Transmission Checks

Changing Engine Oil and Filter

Instructions for draining oil and replacing the oil filter.

Checking and Filling Transmission Oil Level

Procedure to check and fill the transmission oil.

Lubricating Belt Adjuster

Guidance on lubricating the belt adjuster.

Troubleshooting: Engine and Starting Issues

Engine Not Starting or Running Properly

Addresses issues with the starter motor, fuel, spark plug, and carburetor.

Engine Power and Smoothness Troubleshooting

Troubleshoots problems related to engine power and smooth operation.

Troubleshooting: Transmission, Battery, and Cutting

Transmission Power and Battery Charging Issues

Solves problems with transmission power and battery charging.

Vibration, Cutting Quality, and Display Issues

Addresses vibration, cutting quality, and display symbol troubleshooting.

Display Indicators and Transportation Safety

Troubleshooting Display Indicators

Interprets various display symbols and their meanings.

Safe Product Transportation Guidelines

Covers safe practices for transporting the product on vehicles or trailers.

Securing Product for Transport and Storage Prep

Attaching Product to Load Area for Transport

Detailed steps for securely fastening the mower for transport.

Towing the Product and Storage Preparation

Guidelines for towing and preparing the product for storage.

Storage Procedures and Disposal Guidelines

Fuel Stabilization and Storage Warnings

Advises on fuel stabilization and safe indoor storage.

Product Cleaning, Maintenance for Storage, and Disposal

Steps for cleaning, maintenance, and responsible disposal of parts.

Technical Data: Dimensions and Engine

Product Dimensions and Specifications

Lists physical dimensions, weight, and tire specifications.

Engine Specifications and Oil Requirements

Details engine brand, output, displacement, and recommended oil types.

Technical Data: Transmission, Electrical, and Noise

Transmission, Electrical System, and Cutting Deck Specs

Lists transmission, electrical, cutting deck, and noise emission data.

Noise Emissions Data

Reports measured and guaranteed sound power levels for different decks.

Technical Data: Sound, Vibration, and Radio Frequency

Sound Pressure and Vibration Levels

Reports sound pressure and vibration levels at the operator's ear.

Cutting Deck and Blade Specifications

Lists cutting deck widths, heights, weights, and blade article numbers.

Radio Frequency Data

Provides technical data for radio frequency components.

Service and Warranty Information

Scheduled Service Recommendations

Advises on yearly service checks at an authorized center.

Transmission Warranty Conditions

Outlines conditions for the transmission warranty on AWD models.

Compliance and Trademarks

EC Declaration of Conformity

States compliance with relevant EU directives and harmonized standards.

Registered Trademarks List

Lists registered trademarks, including Bluetooth®.

Related product manuals

Husqvarna R 316TsX AWD