To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna R52S and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Material Cutting Deck | Steel |
| Cutting Height | 25-75 mm |
| Wheels | Yes |
| Cutting Methods | Rear discharge |
Read instructions carefully and familiarize with controls and proper use of the equipment.
Wear appropriate clothing, inspect the area, and handle fuel safely before operating.
Follow safe practices during operation, avoid hazards, and know how to stop the engine.
Keep fasteners tight, store the mower safely, and maintain cleanliness for safe operation.
Pull up the handle in the direction of the arrow and tighten the wing-nuts.
Assemble the frame into the grass bag, slip bindings over, and secure to mower housing.
Stop the engine, lift the rear door, remove the catcher by handle, avoid dragging.
Instructions for converting the mower for rear bagging, mulching, or discharging.
Set the mower to different cutting levels for desired grass height.
Adjust the handle to different positions for user comfort.
Add the recommended engine oil to the mower's engine.
Safely start the engine by following priming and starter handle instructions.
Safely stop the engine by releasing the engine brake yoke.
Engage and disengage the mower's forward drive using the clutch bar.
Operate mower on slopes no steeper than 15° to avoid engine lubrication issues.
Remove objects like twigs, toys, and stones from the lawn before mowing.
Mow twice weekly during growth, never cut more than 1/3 of grass length.
Tighten fasteners after 5 hours, check oil level regularly.
Stop engine, unscrew dipstick, check level between FULL and ADD.
Sharpen and balance the cutter blade annually using protective gloves.
Change engine oil after the season or every 25 running hours.
Remove the lid and filter cartridge to clean the air filter.
Remove spark plug lead, empty fuel and oil tanks before public transport.
