To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna TC 239T and is the answer not in the manual?
Understand controls and proper use of equipment.
Prepare the machine and area before operation.
Safe practices for operating the machine.
Procedures for maintaining and storing the machine.
Parts that need to be assembled before using the tractor.
Adjusting the seat for comfortable and safe operation.
Instructions for connecting the tractor battery correctly.
Identification of parts for the bagger assembly.
Step-by-step instructions for assembling the bagger.
Instructions for installing the bagger support assembly.
Adjusting the bagger for proper fit and alignment.
Instructions for installing the bagger latch assembly.
Installing the bagger full lever or extension.
Adjusting the bagger full lever or extension.
Installing the bagger presence lever.
Identifies the location and function of the tractor's controls.
Instructions for safely filling the fuel tank.
How to check and maintain the engine oil level.
Importance of checking tire pressure for proper operation.
Steps to safely start the tractor engine.
Procedure for starting the engine in normal temperatures.
Procedure for starting the engine in cold temperatures.
Procedure to remove trapped air from the transmission.
Instructions for converting the mower to mulching mode.
Instructions for converting the mower to rear discharge.
Instructions for converting the mower to bagging mode.
How to empty the grass bagger.
Procedure for safely shutting off the engine.
How to clean the tractor and mower.
Cleaning debris from the steering plate.
Step-by-step instructions for changing the engine oil.
General maintenance guidelines for the tractor.
Procedures for maintaining and servicing the tractor battery.
Cleaning the air intake screen to prevent engine overheating.
Importance of servicing the air filter for engine performance.
Explanation and verification of safety systems.
Information about mower blades, sharpening, and installation.
Step-by-step guide to removing mower blades.
Instructions for removing the center discharge chute.
Steps for removing the mower deck from the tractor.
Instructions for assembling the cutting unit.
Steps for replacing the mower drive belt.
Adjusting the mower deck for side-to-side levelness.
Adjusting the mower deck for proper front-to-back pitch.
Common causes and solutions for an engine that won't start.
Diagnosing why the starter motor isn't turning the engine.
Troubleshooting engine running unevenly.
Addressing issues causing the engine to feel weak.
Identifying causes of engine overheating.
Diagnosing battery charging problems.
Troubleshooting lighting system issues.
Identifying causes of machine vibration.
Troubleshooting uneven grass cutting.
Information needed when ordering parts or requesting service.
General| Engine | Kawasaki |
|---|---|
| Cutting Width | 97 cm |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Blade Engagement | Electric |
| Cutting Height Adjustment | Manual |
| Sound Power Level | 100 dB(A) |
| Net Power RPM | 3600 rpm |
| Engine Type | 4-stroke |
| Cutting Height, min-max | 25-75 mm |
| Collector Volume | 300 L |
| Wheel Size, Front | 15x6-6 |
