Husqvarna Twin YTH2546 - Page 39

39
TRACTOR - MODEL NO. YTH2546 TWIN(96041005500), PRODUCT NO. 960 41 00-55
MOWER DECK
KEY PART
NO. NO. DESCRIPTION
1 532 41 14-60 Mower Housing
2 532 40 55-07 Cover Mandrel LH
3 532 40 55-06 Cover Mandrel RH
6 532 19 51-86 Arm Suspension
8 532 19 30-03 Bolt/Washer asm 7/16-20 unf
11 532 40 53-80 Blade Mower
13 532 19 28-72 Shaft Assembly, Mandrel
14 532 18 72-81 Housing, Mandrel
15 532 11 04-85 Bearing, Ball, Mandrel
19 532 19 65-39 Bolt, Shoulder
21 873 68 05-00 Nut
23 532 19 25-57 Bracket, Deflector
24 532 10 53-04 Cap, Sleeve
25 532 19 70-26 Spring, Torsion, Deflector
26 532 11 04-52 Nut, Push
27 532 40 53-57 Shield, Deflector
29 532 13 14-91 Rod, Hinge
30 532 17 39-84 Screw Thdrol Rolling Wsh Hd
31 532 18 76-90 Washer, Spacer
32 532 19 59-45 Pulley, Mandrel
33 532 40 02-34 Nut, Toplock, Flanged
34 872 11 06-12 Bolt Carr Sh. 3/8-16 x 1-1/2 Gr. 5
36 532 19 61-06 Pulley, Idler, Flat
40 873 90 06-00 Nut 3/8-16 UNC
46 532 13 77-29 Screw
55 532 19 72-49 Arm, Idler
56 532 19 90-92 Spacer, Retainer
57 817 00 06-16 Screw Hexwsh Thd 3/8-16 x 1
59 532 14 10-43 Guard, Tuv Idler (94)
68 532 40 51-43 V-Belt
69 872 14 05-05 Bolt
116 532 19 34-06 Bolt, Shoulder
117 532 17 48-73 Wheel, Gauge
118 873 90 06-00 Nut Lock Flg. 3/8-16 UNC
119 819 13 20-12 Washer 13/32 x 1-1/4 x 12 Ga.
129 819 13 13-12 Washer 13/32 x 13/16 x 12 Ga.
145 532 17 79-68 Pulley Idler
147 532 19 72-51 Spring
188 532 19 51-61 Stud Fastener
189 873 90 05-00 Nut Lock Hex Flange
198 532 40 31-49 Baffle Center Front
199 532 40 31-50 Baffle Front RH
240 874 52 06-36 Bolt 3/8-16 x 2-1/4 Gr. 5
241 819 13 32-10 Washer 13/32 x 2 x 10 Ga.
- - 532 19 28-70 Mandrel Assembly (Includes
housing, shaft and shaft hardware
only-pulley not included)
- - 532 40 83-54 Replacement Mower, Complete
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm