Need help?Do you have a question about the Husqvarna Xcite Z350 and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | Xcite Z350 |
| Category | Lawn Mower |
| Language | English |
Labels on engine/compartment stating compliance with state requirements, including California emission rules.
Safety warnings regarding battery posts, engine exhaust, and vehicle components.
Confirms pre-delivery inspection and provides space for product/serial numbers.
Information about the Husqvarna Connect app for extended product functions.
Guidance for operating the product for the first time, including throttle and speed.
Checks and preparations required before operating the product.
Instructions and warnings for safely filling the fuel tank.
Description of the ride-on lawn mower and its control levers.
Specifies the intended use of the product for cutting grass on level ground.
Overview of the display, key switch, buttons, and their functions.
Details about information, caution, warning, and error messages displayed.
Explanation of how the product is controlled by the two control levers.
Operation and status indication for the PTO button.
Operation and status indication for the engine START/STOP button.
Explanation of throttle control for engine and blade speed.
Location and identification of fuses in the fuse box.
How to read the hour meter to check engine operation time.
Explanation of safety symbols and warnings on the product.
Definitions of warning, caution, and note used in the manual.
Essential safety guidelines for operating the product.
Specific safety advice to prevent accidents involving children.
General safety rules for operating the product in various conditions.
Precautions for safe operation on sloped terrain.
Importance of checking and maintaining safety devices.
Functionality and checks for the key switch and key.
Information about the accessory rack's use and weight limit.
Function, checks, and safety precautions for the muffler.
Information on the spark arrestor requirement.
Importance of checking and maintaining protective covers.
Critical safety guidelines for handling fuel.
Guidelines for safely transporting the product.
Safety precautions when handling the product's battery.
General safety rules to follow during maintenance.
Information about the Husqvarna Connect app for extended product functions.
Guidance for operating the product for the first time, including throttle and speed.
Checks and preparations required before operating the product.
Instructions and warnings for safely filling the fuel tank.
Display indicators for fuel level and their meanings.
Procedures for adjusting seat position and suspension.
Steps to engage and disengage the parking brake.
Procedure to disengage and engage the drive system.
How to set the cutting deck in transport or mow position.
Instructions for adjusting the cutting deck height.
Table showing cutting height options in inches and centimeters.
Step-by-step guide to start the engine correctly.
Instructions for turning the headlights on and off.
Guidance on moving the product forward, backward, and stopping.
Instructions on how to perform a zero-turn maneuver.
Tips for achieving a good cutting result.
Steps to safely stop the engine and secure the product.
Schedule for daily, yearly, and interval-based maintenance tasks.
Explanation of the servicing symbol on the display.
Steps to reset the servicing timer after maintenance.
Instructions for cleaning the product, engine, muffler, and battery.
Procedure for checking the functionality of the parking brake.
Instructions for charging the battery.
How to perform an emergency start using jumper cables.
Steps for connecting and removing jumper cables.
Procedure for removing and installing the battery.
Steps to remove and install the front wheels.
How to adjust the tracking speed if the product drifts.
Importance of correct tire pressure for all tires.
How to set anti-scalp rollers for different grass lengths.
Procedure to set the cutting deck in a standard position.
How to check blades for damage and sharpening needs.
Steps for replacing the cutting deck blades.
Procedure to remove the deck belt from the pulleys.
Steps to install the deck belt correctly.
Steps to install the pump belt correctly.
Procedure to check and fill the engine oil level.
Detailed steps for draining and replacing engine oil.
Guidelines for lubricating parts of the product.
How to lubricate the cutting deck spindles.
Guide to diagnose and resolve common product problems.
Explanation of caution symbols and their causes.
Explanation of warning symbols and their causes.
Rules and precautions for transporting the product.
Steps to prepare the product for storage.
Information on the proper disposal of the product and its components.
Detailed specifications for the engine, including model and output.
Physical dimensions of the product.
Specifications for cutting height, deck construction, and blades.
Information on tire specifications and transmission details.
Details on electrical components and battery charging times.
To Next Page