To Next PageTo Next PageWhat to do if Husqvarna YT42LS blades will not rotate?
If the mower blades on your Husqvarna Lawn Mower won't rotate, it could be due to an obstruction in the clutch mechanism (remove the obstruction), a worn or damaged mower drive belt (replace the mower drive belt), a frozen idler pulley (replace the idler pulley), or a frozen blade mandrel (replace the blade mandrel).
Why Husqvarna YT42LS Lawn Mower has loss of drive?
If your Husqvarna Lawn Mower experiences a loss of drive, ensure the freewheel control is in the “engaged” position. If equipped, check for debris on the steering plate. Also, inspect the motion drive belt for wear, damage, or breakage and replace if necessary. If air is trapped in the transmission, purge it. Finally, check for and install the axle key at the rear wheel if it is missing.
General| Brand | Husqvarna |
|---|---|
| Model | YT42LS |
| Category | Lawn Mower |
| Language | English |
Covers fundamental operating procedures and safety precautions.
Details safe practices for operating on inclines to prevent accidents.
Emphasizes the dangers to children and necessary precautions.
Identifies and describes the function of various tractor controls and indicators.
Instructions for moving the tractor, using cruise control, and adjusting cutting height.
Details on using the Reverse Operation System for mowing in reverse.
Step-by-step guide for starting the engine, including warm and cold weather procedures.
Procedure to remove trapped air from the transmission for optimal performance.
Outlines the recommended maintenance tasks and their intervals.
Details on selecting oil and performing engine oil changes.
Step-by-step guide for removing and installing the mower deck.
