Husqvarna YTH 224T User Manual

Euro
532 44 63-92
YTH 224T
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them before
using this ma chine.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.
Manual de las instrucciones
Por favor lea cuidadosamente y comp-
renda estas intrucciones an tes de usar
esta maquina.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig
durch und vergewissern Sie sich, daß Sie
diese verstehen, bevor Sie die Maschine
in Betrieb nehmen.

Husqvarna YTH 224T Specifications

General

Cutting Width	42 inches
Transmission	Hydrostatic
Deck Material	Steel
Fuel Type	Gasoline
Cutting Height, min	1.5 inches
Cutting Height, max	4 inches
Blade Engagement	Electric
Turning Radius	16 inches
Fuel Capacity	2.5 gallons
Wheel Size (Front)	15 inches
Wheel Size (Rear)	20 inches

Summary

Safety Rules

Operator Training and Preparation

Essential training and preparation steps for safe mower operation, including familiarization and pre-use checks.

Safe Operation Practices

Guidelines for safe use of the mower during operation, covering slopes, conditions, and general conduct.

Maintenance and Storage Safety

Safety instructions for maintaining and storing the equipment, including fuel handling and fire prevention.

Pre-Operation Procedures

Fueling and Engine Checks

Instructions for safely fueling the engine and performing essential pre-start checks like oil level.

Driving Operations

Engine Starting Procedure

Step-by-step instructions for safely starting the engine, including warm motor and ignition key usage.

Slope Operation Safety

Critical safety warnings and guidelines for operating the tractor on sloped terrain to prevent accidents.

Engine Shut-off and Ignition Key Safety

Maintenance and Adjustments

Pre-Service Checks and Safety

Essential checks and safety precautions required before performing any maintenance on the engine or cutting unit.

Cleaning, Lubrication, and Oil Change

Troubleshooting

Engine and Starting Problems

Common issues preventing engine start-up, uneven running, weak power, and overheating, with solutions.

Other Operational Issues