Need help?Do you have a question about the Husqvarna YTH20B42T and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Power | 20 HP |
| Cylinders | 1 |
| Fuel Type | Gasoline |
| Transmission Type | Hydrostatic |
| Cutting Width | 42 inches |
| Cutting Height | 1.5 - 4 inches |
| Blades | 2 |
| Deck Material | Steel |
| Warranty | 2 years |
| Fuel Capacity | 2.5 gallons |
| Blade Engagement | Electric |
| Turning Radius | 16 in (41 cm) |
| Front Tire Size | 15 x 6 inches |
| Rear Tire Size | 20x8-8 |
Covers basic operational guidelines for the tractor, including safety precautions.
Details safe practices for operating the tractor on inclines to prevent tip-overs.
Outlines precautions to prevent accidents involving children near the tractor.
Familiarizes the user with tractor controls, their locations, and adjustments.
Steps to set the desired cutting height of the mower deck.
Procedure for engaging and operating the mower blades safely.
How to disengage the mower blades using the attachment clutch.
Explains the function and use of the Reverse Operation System.
Detailed steps for using the ROS feature safely.
Safety precautions and techniques for mowing on slopes.
Pre-start checks including engine oil level and fuel.
Step-by-step guide for starting the tractor engine.
Instructions for purging air from the transmission for proper operation.
Advice for achieving optimal mowing performance and results.
A table outlining required maintenance tasks and their frequency.
Verifying the proper function of safety systems.
Step-by-step instructions for changing the engine oil.
Safety precautions before performing service or adjustments.
Procedures for leveling the mower deck.
Adjusting the mower deck for proper front-to-back pitch.
Preparing the fuel system for storage to prevent gum deposits and damage.
Common causes and corrections for engine starting failures.
To Next Page