Need help?Do you have a question about the Husqvarna Z248F and is the answer not in the manual?
General| Engine Manufacturer | Kawasaki |
|---|---|
| Cutting Width | 48 inches |
| Cutting Deck Type | Fabricated |
| Cutting Methods | Collect/Mulch/Side discharge |
| Transmission Type | Hydrostatic |
| Fuel Capacity | 3.5 gal |
| Speed | 6.5 mph |
| Turning Radius | Zero-turn |
| Warranty | 3 years |
| Weight | 600 lb |
| Cutting Height | 1.5 to 4 inches |
Details pre-delivery checks and locating product/serial numbers.
Describes the ride-on mower and specifies its intended use for grass cutting.
Visual guide to product components like control levers, brake, and ignition.
Explains the safety feature that stops the engine/blades when the operator leaves the seat.
Details the four positions of the ignition key and how control levers steer the mower.
Operation of headlights using the ignition key and the function of the hour meter.
Adjusting engine speed, engaging PTO, and managing fuel flow with the shut-off valve.
Using the cold weather control and locating/identifying fuses.
Explains critical warning symbols indicating potential hazards and injury risks.
Defines symbols related to product operation, maintenance, and safety.
Defines WARNING, CAUTION, and NOTE terms used to convey important safety information.
Provides essential safety guidelines for operating the mower safely and preventing accidents.
Warns about dangers to children near the mower and how to keep them safe.
Covers safe operation, engine heat, exhaust hazards, and avoiding obstacles.
Provides specific precautions for operating the mower on slopes to prevent accidents and rollovers.
Recommends PPE and emphasizes checking safety devices for proper function.
Procedure to check ignition key function and conditions required for engine start.
Importance of checking parking brake functionality and muffler condition for safety.
Safety regarding spark arrestors, protective covers, and detailed fuel handling.
Guidelines for safely transporting, hauling, and towing the product.
Safety warnings related to handling, charging, and potential hazards of the product's battery.
Crucial safety advice before performing any maintenance work on the product.
Guidance for initial operation, emphasizing reduced speed and caution.
Step-by-step instructions for adjusting the operator's seat for comfort and proper positioning.
How to fold the seat forward to access the battery and hydrostatic gears.
Explains how the parking brake is integrated into the control levers.
Procedures for disengaging/engaging the drive system and setting the cutting deck.
Instructions for setting the cutting height and starting the engine.
Describes how to move the product forward, backward, and stop using control levers.
Explains how to make turns and zero turns using the control levers.
Instructions on how to cut grass, including speed and throttle settings.
Tips for achieving the best grass cutting result, including speed and pattern.
Outlines the daily, annual, and hourly maintenance tasks required for the product.
Instructions on how to clean the mower deck, engine, and overall product.
How to clean the engine and muffler to prevent fire risk and maintain performance.
Procedure for cleaning battery terminals to ensure a good electrical connection.
Checking parking brake function and procedures for charging the battery.
Instructions for jump-starting the engine and connecting/removing jumper cables.
Procedures for safely removing and installing the product's battery.
Adjusting front wheels, tracking speed, and anti-scalp rollers for optimal performance.
Importance of maintaining correct tire pressure and procedures for front wheels.
Procedure to set the cutting deck in a standard position for optimal cutting.
How to inspect blades for damage/wear and procedures for replacing them.
Steps for removing the cutting deck belt for maintenance or replacement.
Steps for correctly installing the cutting deck belt onto the pulleys.
How to properly check the engine oil level before operating the mower.
Instructions for draining and replacing the engine oil for maintenance.
General guidelines for lubricating the product's parts to ensure smooth operation.
A schedule detailing lubrication points, intervals, and types of lubricants.
Specific instructions for lubricating the front wheel bearings using a grease gun.
Lists common causes and solutions for the engine failing to start.
Addresses problems like rough running, lack of power, and engine overheating.
Troubleshoots issues with battery charging, drive engagement, and product movement.
Guidelines for safely loading, securing, and towing the product.
Instructions for preparing and storing the product, including fire prevention measures.
Information on properly disposing of chemicals, oil, batteries, and the product.
Detailed specifications for the engine, dimensions, weight, and cutting deck.
Details on the cutting deck construction, number of blades, and blade length.
Provides specifications for blade engagement, tires, transmission, and electrical system.
Table showing approximate charging times for the battery based on charger rate.
Recommendations for yearly checks at an authorized service center for optimal function.
Information required when ordering spare parts, including model and serial numbers.
Provides a wiring diagram for the product's electrical system, including key switch positions.
To Next Page
