Husqvarna Z560X User Manual (English)

Questions and Answers:

R
robinsonnoahJul 31, 2025
Why won't my Husqvarna Lawn and Garden Equipment engine start?
- B
  Bonnie JamesAug 1, 2025
  Your Husqvarna Lawn and Garden Equipment engine may not start for several reasons. It could be due to the drive of the blades being engaged. Another potential cause is that the steering controls are not locked in the parking brake position. Also, the battery might be too weak, or there might be dirt in the fuel line. The shut-off valve of the fuel supply may be closed or in the incorrect position. The fuel filter or fuel line could be clogged, or the ignition system might be damaged. To address a weak battery, refer to the instructions on charging the battery.
V
Victoria WrightAug 9, 2025
What causes vibration in my Husqvarna Lawn and Garden Equipment?
- M
  melanie89Aug 9, 2025
  Vibration in your Husqvarna Lawn and Garden Equipment could be caused by loose blades, or one or more unbalanced blades. Also, the engine might be loose. To address loose blades, refer to the instructions on how to examine the blades. If the blades are not balanced, refer to the instructions on the throttle control.
S
Scott SmithAug 14, 2025
Why does the engine on my Husqvarna Lawn and Garden Equipment become too hot?
- P
  plandryAug 14, 2025
  The engine on your Husqvarna Lawn and Garden Equipment might overheat due to a clogged air filter or cooling fins. Overload in the engine, insufficient airflow around the engine, or a damaged engine speed regulator could also be factors. Additionally, a low oil level, dirt in the fuel line, or a damaged spark plug could contribute to the engine overheating.
M
Melissa JohnsonAug 17, 2025
Why is my Husqvarna Lawn and Garden Equipment battery not charging?
- J
  Jason RobinsonAug 17, 2025
  If your Husqvarna Lawn and Garden Equipment battery isn't charging, the connection at the cable connectors on the battery terminals might be bad. The charging lead could be disconnected, or the charging system might not be operating correctly. To address a bad connection at the cable connectors, refer to the instructions on how to clean the battery.
A
Anthony HerreraAug 21, 2025
Why does my Husqvarna Lawn and Garden Equipment move slowly or not at all?
- S
  Sandy RamosAug 21, 2025
  Your Husqvarna Lawn and Garden Equipment might move slowly, irregularly, or not at all if the parking brake is engaged. The hydraulic release lever could also be engaged. Additionally, the drive belt on the transmission might be loose or damaged, or there could be air in the hydraulic system.
J
jacob30Aug 27, 2025
What causes the transaxle to leak oil in my Husqvarna Lawn and Garden Equipment?
- T
  tlivingstonAug 27, 2025
  Oil leaks in the transaxle of your Husqvarna Lawn and Garden Equipment can be caused by damaged seals, housing, or gaskets. Air in the hydraulic system could also be a contributing factor.

Husqvarna Z560X Specifications

General

Brand	Husqvarna
Model	Z560X
Category	Lawn Mower
Language	English

Summary

Safety Instructions

Personal Safety Equipment

Recommended personal protective equipment for safe operation.

General Safety Precautions

Essential safety rules for operating and maintaining the machine.

Child Safety

Preventing accidents involving children near the machine.

Slope Operation Safety

Safety guidelines for operating the machine on slopes.

General Operation Safety

General safety guidelines for operating the machine.

Comprehensive Safety Review

A review of all essential safety instructions for machine operation.

Operator Safety Precautions

Essential safety rules for operating the machine.

General Maintenance Safety

Safety precautions related to general machine maintenance.

Rollover Protection System (ROPS)

Safety information and guidelines regarding the Rollover Protection System.

Child Safety and General Usage

Safety rules for children and general machine usage instructions.

Safe Gasoline Handling

Precautions for handling gasoline safely to prevent fire and explosions.

Safety Guidelines

General safety rules and precautions for operating the machine.

Schematic Diagram

Storage Procedures

Winter Storage Preparation

Steps to prepare the machine for storage during winter.

Winter Storage Guide

Instructions for properly storing the machine during the winter season.

Controls Overview

Troubleshooting Guide

Controls

Steering Control Levers

How to operate the steering control levers for movement and turning.

Park Brake Operation

Instructions on how to engage and disengage the parking brake.

Throttle Control

How to adjust engine speed and blade rotation using the throttle.

Fuel Shut Off Valve

Seat Adjustment and Release

Cutting Height and Fuel Tanks

Tracking Adjustment

Key Control Functions

Explanation of throttle, choke, service meter, blade switch, and fuel indicators.

Steering Controls and Parking Brake

Operation of steering controls and parking brake system.

Ignition Switch Usage

How to use the ignition switch to start and stop the engine.

Cutting Height and Seat Adjustment

Fuse Locations and Fuel Valve

Lubrication Procedures

Component Lubrication Guide

Guide for lubricating various components like engine, wheels, and spindles.

Engine Oil and Wheel Lubrication

Transaxle Fluid Change

Lubrication Schedule

Transmission Purging Procedure

Operation Basics

Engine Starting and Running

Steps for safely starting and running the engine.

Maintenance Guide

Component Checks and Cleaning

Safety System Checks

Ensuring the safety system functions correctly before operation.

Deck Belt Installation and Removal

Maintenance Checklist

Checklist of maintenance tasks for different intervals.

Pre-Operation Checks

Fluid and Filter Changes

Battery Care and Service

Battery Removal and Replacement

Checks and Changes

Blade and Belt Maintenance

Maintenance procedures for cutting blades and drive belts.

Pump Belt Service

Mower Deck Adjustment

Procedures for adjusting the mower deck height and pitch.

Deck Leveling Guide

Maintenance Schedule

Schedule outlining maintenance tasks at various intervals.

Brake and Caster Adjustments

Operation

Starting and Running the Engine

Steps for safely starting and running the engine.

Stopping the Engine

Procedures for correctly stopping the engine and machine.

Operating on Hills

Safety guidelines and techniques for operating on slopes.

Mowing Tips and Techniques

Steering Operation

How to operate the steering control levers for movement and turning.

Before Starting Operations

Starting the Engine

Step-by-step guide to starting the engine safely.

Running the Mower

Operation Overview

Steering Operation Details

Detailed explanation of steering controls for forward, reverse, and turning.

Turning Right

Turning Left

Zero Turn Maneuvering

Roll Bar and Pre-Start Checks

Lawn Cutting Tips

Safety Guidelines

Transport and Towing Safety

Related product manuals

Husqvarna Z560L

72 pages

Husqvarna Z560 series

Husqvarna Z560X User Manual

Table of Contents

Questions and Answers:

Husqvarna Z560X Specifications

Summary

Safety Instructions

Personal Safety Equipment

General Safety Precautions

Child Safety

Slope Operation Safety

General Operation Safety

Comprehensive Safety Review

Operator Safety Precautions

General Maintenance Safety

Rollover Protection System (ROPS)

Child Safety and General Usage

Safe Gasoline Handling

Safety Guidelines

Schematic Diagram

Storage Procedures

Winter Storage Preparation

Winter Storage Guide

Controls Overview

Troubleshooting Guide

Controls

Steering Control Levers

Park Brake Operation

Throttle Control

Fuel Shut Off Valve

Seat Adjustment and Release

Cutting Height and Fuel Tanks

Tracking Adjustment

Key Control Functions

Steering Controls and Parking Brake

Ignition Switch Usage

Cutting Height and Seat Adjustment

Fuse Locations and Fuel Valve

Lubrication Procedures

Component Lubrication Guide

Engine Oil and Wheel Lubrication

Transaxle Fluid Change

Lubrication Schedule

Transmission Purging Procedure

Operation Basics

Engine Starting and Running

Maintenance Guide

Component Checks and Cleaning

Safety System Checks

Deck Belt Installation and Removal

Maintenance Checklist

Pre-Operation Checks

Fluid and Filter Changes

Battery Care and Service

Battery Removal and Replacement

Checks and Changes

Blade and Belt Maintenance

Pump Belt Service

Mower Deck Adjustment

Deck Leveling Guide

Maintenance Schedule

Brake and Caster Adjustments

Operation

Starting and Running the Engine

Stopping the Engine

Operating on Hills

Mowing Tips and Techniques

Steering Operation

Before Starting Operations

Starting the Engine

Running the Mower

Operation Overview

Steering Operation Details

Turning Right

Turning Left

Zero Turn Maneuvering

Roll Bar and Pre-Start Checks

Lawn Cutting Tips

Safety Guidelines

Transport and Towing Safety

Related product manuals