Husqvarna Zig Zag - Electric motor and knee-control operation; Machine lighting and bobbin winding; Winding the bobbin spool

The electnic
motor and
knee-control.
0n
the motor there is a
sign plate
at
L, Fig. 6,
showing
the voltage
of
the
motor.
The
position
of the
knee-
control
lever can be
ad-
justed
by
means of the
screw
that secures
the lever
to
the machine.
The lever
can thus be fixed
into the
position
best
suited
ro the
person
using the machine.
A
light
pressure with
the
knee
against the control
lever
vzitrl start the machine;
the
farther
the
lever is moved
to
the
right,
the
more the
speed is increased,
up to the maximum.
Some
practice is required
before
the speed
of the
machine
ean be regulated
correctly.
Machine
lighting.
'S/inding
rhe bobbin.
Machine
The machine
lamp
is
en-
closed in
a hinged
coyer
plate
on the forward
part.
of the
arm.
The
lamp
is
turned
on
and off
with the press-burron
1,
Fig.
8.
To
change
the
lamp,
the
cover
is swung
open
simply by gripping
the fronr
edge close
to the
take-up
lever.
lighting.
The thread is
guidccl
from
the cotton reel in thc
hole
in thread
guide 1,, Fig.
9, which
should be swur)H
Fis. 9.
Fig"
8"
\ilfindirg
rhe
spool.
Fig. 7.