3 G/M Codes
3 - 65
3.23 Deep Hole Drilling Cycle (Z axis) G83,G80
Format:
G83 Z(W)___ Q___ R___ F___ ; Deep hole drilling cycle
G80 ; Fixed cycle for drilling cancel
Parameters:
Z(W) Point the hole position with absolute or increment
Q Each depth of drilling (Unit: m , Q10000=10mm)
If Q with no values that drilling motion will finish one time.
R Point of reference with go forward or move backward
Absolute position
If R with no values that it will according to now Z coordinates be R
values.
F Drilling speed feed-rate (mm/rev)
Fig 3-48 G83 Drilling
3.24 Tapping Cycle G84,G80
G80 Fixed cycle for drilling cancel
G84 Tapping cycle
S
Pause time
To Next Page
Loading...