Need help?Do you have a question about the HUST CNC H2N and is the answer not in the manual?
General| Minimum Command Unit | 0.001 mm |
|---|---|
| Spindle Speed Override | 50-120% |
| Display | 7.0 inch color LCD |
| Communication Interface | USB |
| Power Supply | AC 220V ±10% |
| Input Voltage | 220V AC |
| Power Consumption | <100W |
| Operating Temperature | 0~45℃ |
| Storage Temperature | -20~60℃ |
| Spindle Control | Analog 0-10V |
To Next Page