4 Connecting Diagrams
4 - 1
4 CONNECTING DIAGRAMS
4.1 Connector Type
The types of connectors provided on the HUST H2N controller box are summarized
below. Each connector symbol is followed by a letter of either M (for male) or F (for
female).
DB9LF (or M) : D sub type connector 9 pins female (or male).
DB25LF (or M) : D sub type connector 25 pins female (or male).
TBxx : Terminal block with pin number indicated by “xx”
4.2 Connector Designation
The connector designation on HUST H2N controller in printed on the back of the
controller and their corresponding types are listed below.
Connector Name Connector Designation Type
Output Interface P1 DB25LM (Male)
Input Interface P2
DB25LF
(Female)
MPG Handwheel P3 DB9LM (M)
X-axis Servo P4 DB9LF (F)
Y/Z-axis Servo P5 DB9LF (F)
D/A Output for Spindle P6 DB9LM (M)
RS232C Interface P7 DB9LF (F)
Main Board DC Power JP1 TB10
Keyboard Connector JP2 TB20
LCD Connector JP3 TB20
220V AC Power
R
和
T
TB3
Table 4-1 Connector Designation and Type
To Next Page
Loading...
Need help?
General
