3 G/M Codes
3 - 105
Relative value command
Hypothetical corner intersection
point
Unit (mm)
3.29.2 Round-angle chamfer ( , R_ )
Functions and Purposes:
In 2 consecutive blocks, the “,R_” command in the first block executes a round-angle
chamfer. “,R_” stands for the radius of arc of the round-angle chamfer.
Command Format:
N100 G0x X___ Z___,R___ ;
N200 G0x X___ Z___ ;
Where:
G0x can be any of the G00, G01, G02, and G03 commands.
,R_ is the radius of round-angle chamfer.
Program Example:
Line Arc
Fig. 3-87
bsolute value command
To Next Page
Loading...