HUST CNC H6D-T Manual
5 - 38
Other wiring Example 5: DC Power Output
Single Output Point: The maximum current to be sustained by PC Board will be 1A.
When using 8 output points simultaneously: The maximum current to be sustained by
PC Board will be 8A.
Fig.5-44
As per the figure, when the
Controller is O015=1 (07), then
it will output DC 24V voltage.
Default Fuse Withstand Current:
5A
DC24V
Voltage Output
DC24V
Voltage Input
10-Pin Soft Harness
To Next Page
Loading...