7 MCM Parameters
7 - 27
282. Home Direction for Tool, Y-axis.
283. Home Direction for Tool, Z-axis.
284. Home Direction for Tool, A-axis.
285. Home Direction for Tool, B-axis.
286. Home Direction for Tool, C-axis.
287. Home Direction for Tool, U-axis.
288. Home Direction for Tool, V-axis.
289. Home Direction for Tool, W-axis.
Format (Default=0)
Setting = 0, Tool returning to HOME in the positive direction.
Setting = 1, Tool returning to HOME in the negative direction
MCM# 290~300 System Reserved
301. Home Speed When Tool Going to Home, X-axis.
302. Home Speed When Tool Going to Home, Y-axis.
303. Home Speed When Tool Going to Home, Z-axis.
304. Home Speed When Tool Going to Home, A-axis.
305. Home Speed When Tool Going to Home, B-axis.
306. Home Speed When Tool Going to Home, C-axis.
307. Home Speed When Tool Going to Home, U-axis
308. Home Speed When Tool Going to Home, V-axis
309. Home Speed When Tool Going to Home, W-axis
Format Unit: mm/min (Default=2500)
MCM# 310~320 System Reserved
321. Home Grid Speed When Tool Going to Home, X-axis.
322. Home Grid Speed When Tool Going to Home, Y-axis.
323. Home Grid Speed When Tool Going to Home, Z-axis.
324. Home Grid Speed When Tool Going to Home, A-axis.
325. Home Grid Speed When Tool Going to Home, B-axis.
326. Home Grid Speed When Tool Going to Home, C-axis.
327. Home Grid Speed When Tool Going to Home, U-axis.
328. Home Grid Speed When Tool Going to Home, V-axis.
329. Home Grid Speed When Tool Going to Home, W-axis.
Format Unit: mm/min (Default=40)
MCM# 330~340 System Reserved
341. The direction that servo motor search the Grid when X-axis going back to HOME.
342. The direction that servo motor search the Grid when Y-axis going back to HOME.
343. The direction that servo motor search the Grid when Z-axis going back to HOME.
344. The direction that servo motor search the Grid when A-axis going back to HOME.
345. The direction that servo motor search the Grid when B-axis going back to HOME.
346. The direction that servo motor search the Grid when C-axis going back to HOME.
347. The direction that servo motor search the Grid when U-axis going back to HOME.
348. The direction that servo motor search the Grid when V-axis going back to HOME.
To Next Page
Loading...