HUST CNC H6D-T Manual
9 - 16
9.5.1 File Download Interface
Press the function keyDownload on the transmission operating interface, you can enter
the screen as shown in Fig 9-9 and 9-10.
Fig 9-9
Fig 9-10
Download USB CNC
Example: Steps for downloading a plc file are:
1. Press the Download function key to enter the download interface.
2. Go to the PLC (*.PLC) file using the cursor.
3. Press the PLC function key.
4. Check for any transmission indication appearing on the upper left corner
of the screen.
5. After transmission, the screen will show “DATA LOADING OK”.
Note: To download data, first point the cursor to the file to be downloaded, and then
press the desirable function key.
To Next Page
Loading...