3 G/M Codes
3 - 37
Details:
In Fig. 3-22, the cutting paths 1 and 4 are fast positioned by G00. The cutting along the
paths 2 and 3 is executed at the feed-rate F. Whenever the start button (CYCST) is
pressed in a block, the tool moves along the paths 1~2~3~4 to execute a cutting cycle.
2. Outer/Inner Diameter Tapered Lateral Canned Cycle
, G90
Format:
G90 X(U)____ Z(W)____ R____ F____
R : The difference between point B and C in radius.
X, Z, U, W and F are identical to those in lateral linear canned cycle.
Fig. 3-25 G90 Tapered Cutting Path
X
Z
Z
W
A
B
D
4
1
2
3
U/2
X/2
R
To Next Page
Loading...