108548_0711 5-5
Gearshift lever
Adjust the gearshift lever to .04” - .51” (1 - 3 mm) as shown
in Fig. 5-11.
1. If adjustment is necessary, adjust by turning the adjuster
and loosening the lock nut on the gearshift cable.
Fig. 5-12
2. Set the adjuster to the optimal position and tighten the
lock nut. Fig. 5-12
3. Start the engine and confirm that the running speed
changes when the gearshift lever is operated.
Fig. 5-11
Fig. 5-12
Gearshift lever
.04” - .51”
(1-3mm)
Adjuster
Lock nut
Gearshift
cable
To Next Page
Loading...
